cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
21333
Views
13
Helpful
10
Replies

Life Expectancy of Cisco Equipment

joealcala
Level 1
Level 1

Can anyone tell me what the lifetime expectancy (or MTBF) is of the Cisco switches. In particular, the 2950, 2970, and 3750. I can't seem to find any documentation on this.

I am researching the advantages/disadvantages of leasing vs. buying Cisco equipment, but I need to know how long these products are good for.

Thanks

1 Accepted Solution

Accepted Solutions

Hello Joe,

the MTBF info can usually be found in the data sheet for the correpsonding device, as in the link below:

Cisco Catalyst 2970 Series Switch Data Sheet

http://www.cisco.com/en/US/products/hw/switches/ps5206/products_data_sheet09186a0080197384.html

HTH,

GP

View solution in original post

10 Replies 10

Hello,

I found the following:

Mean Time Between Failure (MTBF) Predicted

268292 hours (Catalyst 2950-24)

318440 hours (Catalyst 2950-12)

403214 hours (Catalyst 2950SX-24)

163,222 hrs (Cisco Catalyst 2970G-24TS)

219,108 hrs (Cisco Catalyst 2970G-24T)

188,574 hours (Cisco Catalyst 3750G-24TS)

210,936 hours (Cisco Catalyst 3750G-24T)

215,000 hours (Cisco Catalyst 3750G-12S)

259,729 hours (Cisco Catalyst 3750G-12S-SD)

217,824 hours (Cisco Catalyst 3750-48TS)

294,928 hours (Cisco Catalyst 3750-24TS)

269,011 hours (Cisco Catalyst 3750-24FS)

166,408 hours (Cisco Catalyst 3750-48PS)

209,170 hours (Cisco Catalyst 3750-24PS)

184,422 hours (Cisco Catalyst 3750G-16TD)

165,243 hours (Cisco Catalyst 3750G-48TS)

141,005 hours (Cisco Catalyst 3750G-48PS)

221,150 hours (Cisco Catalyst 3750G-24TS-1U)

182,373 hours (Cisco Catalyst 3750G-24PS)

HTH,

GP

Put it this way, you will be upgrading long before your equipment dies.

how will i know when my switch or router die?

So if there are 8760 Hours in a year, looks like even the smallest MTBF is the 2970 and that would be roughly 18 years before a failure. OK, yeah its pretty safe to say I'll be replacing the equipment before then.

GP, where on the Cisco site did you find this information?

Thanks

AFAIK if the MBTF is 18 years then there will be 1 expected failure for every 18 devices in the next year.

At least that is how I have always understood it.

Hello Joe,

the MTBF info can usually be found in the data sheet for the correpsonding device, as in the link below:

Cisco Catalyst 2970 Series Switch Data Sheet

http://www.cisco.com/en/US/products/hw/switches/ps5206/products_data_sheet09186a0080197384.html

HTH,

GP

Perfect.

Thanks.

hi all

which ios command can i use on the Switch to know how much time to reach the MBTF

there is no command that I know to show that . You can get uptime since last rebooted but that is about it.

dave.keith
Level 1
Level 1

Some of these models may have lifetime warranties, in which case Cisco brings them back to life if they happen to die ... so they're immortal !

Dave

Review Cisco Networking for a $25 gift card