12-02-2013 03:00 PM - edited 03-07-2019 04:53 PM
i install two modules WS-SSC-600 and 7600-SIP-400 in slot 5 and 6 in 13-slot chassis and give this output from show power (Linecard image not present)
for both cards.
supervisor engine is : VS-S720-10G with sub-module VS-F6K-PFC3CXL and VS-F6K-MSFC3
IOS : s72033-advipservicesk9-mz.122-33.SXI9
what that mean and how to fix it ?
12-02-2013 05:03 PM
On the SIP card, is there an LED light, if yes, what color?
12-11-2013 02:07 PM
surry for late the two modules - are not powered up so - LED is not light
12-11-2013 02:10 PM
do you have any idea about this output and why the modules are not powered off.
thanks
12-11-2013 02:57 PM
hum... reinsert the linecard ;)
Sent from Cisco Technical Support iPad App
12-11-2013 05:07 PM
i will test and feed you back . But i need to sure from slote number i put them in slot 5 and 6 at 6513 chassis is it correct or need to change slot number?
Thanks
12-11-2013 05:10 PM
also i need upgrade IOS or not?
12-15-2013 07:53 AM
Ok problem solved by upgrade ios to another version but the new image must contains (_wan) in image name for example (
s72033-advipservicesk9_wan-mz.122-33.SXJ6 ) otherwise the two modules will not powered up.
12-15-2013 11:15 AM
Done thanks
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide