04-26-2012 08:04 PM - edited 03-07-2019 06:22 AM
Greetings to all, I am in need of some expert advice.
I have 3 877 ADSL routers for internet connectivity. I recently installed a FW behind them and would like to use the Ciscos as load balance in order to get better utilization from my 3 internet links.
Any ideas?
1) the 3 routers are on DHCP from the ISP on the WAN side.
2) the 3 ciscos are on the same class C subnet on the LAN side: 10.201.1.252, 10.201.1.253 and 10.201.1.254
Thanks!!!
04-26-2012 08:47 PM
Configure GSLB or VRRP on your routers.
Sent from Cisco Technical Support iPhone App
04-27-2012 05:53 AM
Hey there thanks.
How do I configure these, any examples or links please?
Thanks.
Sent from Cisco Technical Support iPhone App
04-29-2012 06:19 PM
Hi Humberto,
Sorry it's GLBP not GSLB.
To configure it:
Router 1:
interface fx/y
ip address 1.1.1.2 255.255.255.0
glbp 7 ip 1.1.1.1
glbp 7 priority 150
glbp 7 timers msec 200 msec 700
Router2:
interface fx/y
ip address 1.1.1.3 255.255.255.0
glbp 7 ip 1.1.1.1
glbp 7 priority 100
glbp 7 timers msec 200 msec 700
Router 3:
interface fx/y
ip address 1.1.1.4 255.255.255.0
glbp 7 ip 1.1.1.1
glbp 7 priority 50
glbp 7 timers msec 200 msec 700
Hope this helps.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide