05-17-2010 11:27 AM - edited 03-06-2019 11:08 AM
Hello,
we want to create one line from 2x 22 Mbit line on 5GHz. Is possible to use for it Catalist switch with lan base ISO?
Is possible to crate it with Trunking or PortChannel or with PAgP...
I am a beginner it this , please can anybody helps me?
Tahnx
David
05-17-2010 11:51 AM
Hi David
Is the ip connectivity being formed between 2 network devices? One end is a catalyst switch can you tell us what's there on the other side of the link ?
Also are you getting ethernet drops for these links at your end? what's the csu/dsu device which is delivering the links to you ?
regds
05-17-2010 11:56 AM
Hi,
See scheme:
22 Mbit HD WIFI link latency 1-4 ms
---------------------------------------
ISP 1.1.1.0/24 --- Catalist 2960 IPB IOS -----Catalist 2960 IPB IOS ---- 1.1.1.0/24 Our Router
22 Mbit HD WIFI link latency 1-4 ms
---------------------------------------
From simple schceme you can see that the link is transparent line like "wire"
We just want to have bigger conectivity if it is opssible
05-17-2010 12:13 PM
Hi
You can create the port channel between the switches and make sure that you have all the devices in same vlan to have the reachability between your router and your isp.
regds
05-17-2010 12:21 PM
Thanx,
and please how it is working if one wifi line will be 50 Mbit and the second will be 20 Mbit? Will it works with one 70 Mbit line or there must be 2 lines with same speed parameters?
Thanx
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: