09-19-2012 03:25 PM - edited 03-07-2019 08:58 AM
Hi All,
In one of my router, show logging command show following capure, which I need to disable
Pls find my router config in relevant area.
logging buffered 16384
logging console critical
logging monitor informational logging buffered 16384
logging console critical
logging monitor informational
access-list 20 permit 10.190.186.100 log
Problem description: In every router in my Network, having the same above config, but only One router showing the loggign messgae in the "show log" command o/p
Pls suggest further asap
BG2RT0502#sh logging
Syslog logging: enabled (0 messages dropped, 2 messages rate-limited, 0 flushes, 0 overruns, xml disabled, filtering disabled)
No Active Message Discriminator.
No Inactive Message Discriminator.
Console logging: level critical, 3 messages logged, xml disabled,
filtering disabled
Monitor logging: level informational, 6 messages logged, xml disabled,
filtering disabled
Buffer logging: level debugging, 17305 messages logged, xml disabled,
filtering disabled
Exception Logging: size (4096 bytes)
Count and timestamp logging messages: disabled
Persistent logging: disabled
No active filter modules.
Trap logging: level debugging, 17309 message lines logged
Logging to 10.190.186.100 (udp port 514, audit disabled,
authentication disabled, encryption disabled, link up),
17309 message lines logged,
0 message lines rate-limited,
0 message lines dropped-by-MD,
xml disabled, sequence number disabled
filtering disabled
Log Buffer (16384 bytes):
st 20 permitted 10.190.186.100 4 packets
017136: Sep 19 14:31:05.078 INDIA: %SEC-6-IPACCESSLOGS: list 20 permitted 10.190.186.100 5 packets
017137: Sep 19 14:36:09.236 INDIA: %SEC-6-IPACCESSLOGS: list 20 permitted 10.190.186.100 5 packets
017138: Sep 19 14:41:09.449 INDIA: %SEC-6-IPACCESSLOGS: list 20 permitted 10.190.186.100 4 packets
017139: Sep 19 14:46:09.656 INDIA: %SEC-6-IPACCESSLOGS: list 20 permitted 10.190.186.100 3 packets
017140: Sep 19 14:51:09.861 INDIA: %SEC-6-IPACCESSLOGS: list 20 permitted 10.190.186.100 3 packets
017141: Sep 19 14:56:10.062 INDIA: %SEC-6-IPACCESSLOGS: list 20 permitted 10.190.186.100 4 packets
09-19-2012 03:35 PM
>>Pls suggest further asap
ASAP?
Who are you again? lol
09-19-2012 05:39 PM
Router Log O/p:
BG2RT0502#sh logging
Syslog logging: enabled (0 messages dropped, 2 messages rate-limited, 0 flushes, 0 overruns, xml disabled, filtering disabled)
No Active Message Discriminator.
No Inactive Message Discriminator.
Console logging: level critical, 3 messages logged, xml disabled,
filtering disabled
Monitor logging: level informational, 6 messages logged, xml disabled,
filtering disabled
Buffer logging: level debugging, 17305 messages logged, xml disabled,
filtering disabled
Exception Logging: size (4096 bytes)
Count and timestamp logging messages: disabled
Persistent logging: disabled
No active filter modules.
Trap logging: level debugging, 17309 message lines logged
Logging to 10.190.186.100 (udp port 514, audit disabled,
authentication disabled, encryption disabled, link up),
17309 message lines logged,
0 message lines rate-limited,
0 message lines dropped-by-MD,
xml disabled, sequence number disabled
filtering disabled
Log Buffer (16384 bytes):
st 20 permitted 10.190.186.100 4 packets
017136: Sep 19 14:31:05.078 INDIA: %SEC-6-IPACCESSLOGS: list 20 permitted 10.190.186.100 5 packets
017137: Sep 19 14:36:09.236 INDIA: %SEC-6-IPACCESSLOGS: list 20 permitted 10.190.186.100 5 packets
017138: Sep 19 14:41:09.449 INDIA: %SEC-6-IPACCESSLOGS: list 20 permitted 10.190.186.100 4 packets
017139: Sep 19 14:46:09.656 INDIA: %SEC-6-IPACCESSLOGS: list 20 permitted 10.190.186.100 3 packets
017140: Sep 19 14:51:09.861 INDIA: %SEC-6-IPACCESSLOGS: list 20 permitted 10.190.186.100 3 packets
017141: Sep 19 14:56:10.062 INDIA: %SEC-6-IPACCESSLOGS: list 20 permitted 10.190.186.100 4 packets
09-19-2012 06:06 PM
Hi there,
try this
no access-list 20 permit 10.190.186.100 log
and then
access-list 20 permit 10.190.186.100
thanks
09-20-2012 01:09 PM
Hi,
I agree to your point, but as per our standard config, we need to have " access-list 20 permit 10.190.186.100 log" this commnad.
Pls note, In our network all other router having the same command, but only 1 router is generating the log message.
09-20-2012 01:24 PM
Hi ,
is there any debug runing on this router??
like debug ip packets ?
thanks
09-20-2012 06:00 PM
No debug is running on the router
09-20-2012 06:43 PM
are you able to attach config from 2 routers.
one with woring and one with not,
thanks
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide