cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1984
Views
0
Helpful
7
Replies

Log message in Router

accenture-bang2
Level 1
Level 1

                   Hi All,

In one of my router, show logging command show following capure, which I need to disable

Pls find my router config in relevant area.

logging buffered 16384

logging console critical

logging monitor informational logging buffered 16384
logging console critical
logging monitor informational

access-list 20 permit 10.190.186.100 log

Problem description:  In every router in my Network, having the same above config, but only One router showing the loggign messgae in the "show log" command o/p

Pls suggest further asap

BG2RT0502#sh logging
Syslog logging: enabled (0 messages dropped, 2 messages rate-limited, 0 flushes, 0 overruns, xml disabled, filtering disabled)

No Active Message Discriminator.

No Inactive Message Discriminator.


    Console logging: level critical, 3 messages logged, xml disabled,
                     filtering disabled
    Monitor logging: level informational, 6 messages logged, xml disabled,
                     filtering disabled
    Buffer logging:  level debugging, 17305 messages logged, xml disabled,
                    filtering disabled
    Exception Logging: size (4096 bytes)
    Count and timestamp logging messages: disabled
    Persistent logging: disabled

No active filter modules.

    Trap logging: level debugging, 17309 message lines logged
        Logging to 10.190.186.100  (udp port 514,  audit disabled,
              authentication disabled, encryption disabled, link up),
              17309 message lines logged,
              0 message lines rate-limited,
              0 message lines dropped-by-MD,
              xml disabled, sequence number disabled
              filtering disabled
         
Log Buffer (16384 bytes):
st 20 permitted 10.190.186.100 4 packets
017136: Sep 19 14:31:05.078 INDIA: %SEC-6-IPACCESSLOGS: list 20 permitted 10.190.186.100 5 packets
017137: Sep 19 14:36:09.236 INDIA: %SEC-6-IPACCESSLOGS: list 20 permitted 10.190.186.100 5 packets
017138: Sep 19 14:41:09.449 INDIA: %SEC-6-IPACCESSLOGS: list 20 permitted 10.190.186.100 4 packets
017139: Sep 19 14:46:09.656 INDIA: %SEC-6-IPACCESSLOGS: list 20 permitted 10.190.186.100 3 packets
017140: Sep 19 14:51:09.861 INDIA: %SEC-6-IPACCESSLOGS: list 20 permitted 10.190.186.100 3 packets
017141: Sep 19 14:56:10.062 INDIA: %SEC-6-IPACCESSLOGS: list 20 permitted 10.190.186.100 4 packets

7 Replies 7

jimmysands73_2
Level 5
Level 5

>>Pls suggest further asap

ASAP? 

Who are you again? lol

accenture-bang2
Level 1
Level 1

Router Log O/p:

BG2RT0502#sh logging
Syslog logging: enabled (0 messages dropped, 2 messages rate-limited, 0 flushes, 0 overruns, xml disabled, filtering disabled)

No Active Message Discriminator.

No Inactive Message Discriminator.


    Console logging: level critical, 3 messages logged, xml disabled,
                     filtering disabled
    Monitor logging: level informational, 6 messages logged, xml disabled,
                     filtering disabled
    Buffer logging:  level debugging, 17305 messages logged, xml disabled,
                    filtering disabled
    Exception Logging: size (4096 bytes)
    Count and timestamp logging messages: disabled
    Persistent logging: disabled

No active filter modules.

    Trap logging: level debugging, 17309 message lines logged
        Logging to 10.190.186.100  (udp port 514,  audit disabled,
              authentication disabled, encryption disabled, link up),
              17309 message lines logged,
              0 message lines rate-limited,
              0 message lines dropped-by-MD,
              xml disabled, sequence number disabled
              filtering disabled
         
Log Buffer (16384 bytes):
st 20 permitted 10.190.186.100 4 packets
017136: Sep 19 14:31:05.078 INDIA: %SEC-6-IPACCESSLOGS: list 20 permitted 10.190.186.100 5 packets
017137: Sep 19 14:36:09.236 INDIA: %SEC-6-IPACCESSLOGS: list 20 permitted 10.190.186.100 5 packets
017138: Sep 19 14:41:09.449 INDIA: %SEC-6-IPACCESSLOGS: list 20 permitted 10.190.186.100 4 packets
017139: Sep 19 14:46:09.656 INDIA: %SEC-6-IPACCESSLOGS: list 20 permitted 10.190.186.100 3 packets
017140: Sep 19 14:51:09.861 INDIA: %SEC-6-IPACCESSLOGS: list 20 permitted 10.190.186.100 3 packets
017141: Sep 19 14:56:10.062 INDIA: %SEC-6-IPACCESSLOGS: list 20 permitted 10.190.186.100 4 packets

Hi there,

try this

no access-list 20 permit 10.190.186.100 log

and then

access-list 20 permit 10.190.186.100

thanks

Hi,

I agree to your point, but as per our standard config, we need to have " access-list 20 permit 10.190.186.100 log" this commnad.

Pls note, In our network all other router having the same command, but only 1 router is generating the log message.

Hi ,

is there any debug runing on this router??

like debug ip packets ?

thanks

No debug is running on the router

are you able to attach config from 2 routers.

one with woring and one with not,

thanks

Review Cisco Networking products for a $25 gift card