Logging snmp linkdown/linkup 3750's

[oricacomms]

I must be having a brain sludge day.

Senario

2 x 3570's (stackmembers) at location A

2 x 3570's (stackmembers) at location B

they are connected via 2 trunks in a etherchannel group.

The question is for command

snmp [authentication |

coldstart | linkdown |

linkup | warmstart]

I'd like to only be notified of the up/down status on the trunked interfaces only and not of any of the other interfaces configured as switchport access.

Thoughts..Thanks

[glen.grant]

Make sure you have " no snmp trap link-status " on all user access ports . Not sure if that is the exact syntax but its close just use your tab key for the correct commands.