Solved: Re: Lose config on 6506 switch

burleyman · ‎10-12-2006

After a power off of our switch we keep losing the config. I have made sure the start config and running config are the same. What I did find is the config register is set to 0x9006???? I have never seen this....can someone enlighten me as I think this is the problem. The config stays under normal operation just gets lost on power off and on.

Thanks,

Mike

Anand Narayana · ‎10-12-2006

Hi Mike,

config register 0x9006 means "enable diagnostices & ignore NVRAM & also the baud rate is 1200" set the config register as 0x2102 or 0x2 for normal operation.

hope this helps.

View solution in original post

Anand Narayana · ‎10-12-2006

Hi Mike,

config register 0x9006 means "enable diagnostices & ignore NVRAM & also the baud rate is 1200" set the config register as 0x2102 or 0x2 for normal operation.

hope this helps.

burleyman · ‎10-12-2006

That is what I thought but I just wanted to check. I have since found a Config reg tool that told me just that.

Thanks,

Mike

Anand Narayana · ‎10-12-2006

Hi Mike,

if this issue is been solved, please update in this forum as it might be helpful for others.

Anand