11-16-2006 01:27 PM - edited 03-05-2019 12:52 PM
Hello, Just did smething stupid. Deleted all my flash images (catalyst 2950 24). I have them on a tftp server though. How do i get them. When i reeboot, i get the swith: prompt. What is the sytax to load or copy from the tftp.
Help
Daniel.
Solved! Go to Solution.
11-16-2006 01:46 PM
Follow the step-by-step procedure listed in the below document to recover the switch.
http://cisco.com/en/US/products/hw/switches/ps628/products_tech_note09186a0080169696.shtml#topic2
Good Luck!!
HTH
Sundar
11-16-2006 01:46 PM
Follow the step-by-step procedure listed in the below document to recover the switch.
http://cisco.com/en/US/products/hw/switches/ps628/products_tech_note09186a0080169696.shtml#topic2
Good Luck!!
HTH
Sundar
11-16-2006 01:47 PM
Hi Daniel ,
Check the below link for Recovering Catalyst Fixed Configuration Switches from a Corrupted or Missing Image.
Hope it resolves your problem.Plz rate it.
Thanks,
satish
11-17-2006 01:00 AM
Hello Satish,
Thanks for your response, but i can't access this the link (authentication needed).
D.
11-17-2006 02:49 AM
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide