cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
897
Views
0
Helpful
4
Replies

Mac binding in layer 3 switche

aus
Level 1
Level 1

how i can mac bind in 3750x of ip phones. I have a 500 phones where all get ip address by subnet /23, is it possible to bind their mac through dhcp core server switche not a static on interfaces

4 Replies 4

balaji.bandi
Hall of Fame
Hall of Fame

yes possible, rather doing on switch, get DHCP Server and add reservation IP against MAC Address.

 

BB

***** Rate All Helpful Responses *****

How to Ask The Cisco Community for Help

aus
Level 1
Level 1

Actually, I make a core switch vtp server and other are client and configure a core switch as a DHCP server. All ip phone have an ip address range is 172.16.10.0/23. But I want to bind their mac in core switch dynamically not a static

in that case example provided by @paul driver still valid.

 

BB

***** Rate All Helpful Responses *****

How to Ask The Cisco Community for Help

Hello
You don’t mention what you are using for dhcp allocation, so given this is a cisco forum I would go with cisco - LOL
You could use a dhcp origin file residing on a file share to accomplish this however I would envisage it would be quite an administrative task to keep on top of 500 entries!


example:
create a txt file Phone.txt
!IP address Type Hardware address Lease expiration
192.168.1.1/24 1 0011.1111.1111.11 Infinite
192.168.1.2/24 1 0022.2222.2222.22 Infinite
192.168.1.3/24 1 0033.3333.3333.33 Infinite

etc..
*end*
.

Cisco dhcp pool
no service dhcp < need to stop the dhcp servcie first if one is already running
ip dhcp pool LAN
origin file tftp://x.x.x./Phones.txt
servcie dhcp < re enable dhcp


Please rate and mark as an accepted solution if you have found any of the information provided useful.
This then could assist others on these forums to find a valuable answer and broadens the community’s global network.

Kind Regards
Paul
Review Cisco Networking for a $25 gift card