Manual method in cellular interface

[khaledsallam89]

When i type this command , show my in br i found that the method in cellular 0/2/0 is manual with unassigned IP although the other cellular interface 0/1/0 is IPCP and can obtain the SIM IP normally.

Tried to test the SM Card in another modems and it is woring fine.

How to change the method from manual to IPCP?

[M02@rt37]

Hello @khaledsallam89,

Which model?

Do you try:

interface Cellular0/2/0

encapsulation ppp

ip address negotiated

--the specific commands and syntax may vary depending on the router model