07-12-2014 09:46 AM - edited 03-07-2019 08:02 PM
Solved! Go to Solution.
07-12-2014 02:17 PM
Hi,
With 6500 chassis you can only install
supy cards in specific slots.
see this link:-
http://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst6500/hardware/Module_Installation/Sup_Eng_Guide/supe_gd/01overvw.html#wp1069525
Looking at your photo (6509 chasis) and that you say you
a sup2-3ge.
Your SUP2 MUST be installed in slot 1 or 2
The metal blocks prevent the card from being installed in the wrong slots
Regards
Alex
07-12-2014 02:17 PM
Hi,
With 6500 chassis you can only install
supy cards in specific slots.
see this link:-
http://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst6500/hardware/Module_Installation/Sup_Eng_Guide/supe_gd/01overvw.html#wp1069525
Looking at your photo (6509 chasis) and that you say you
a sup2-3ge.
Your SUP2 MUST be installed in slot 1 or 2
The metal blocks prevent the card from being installed in the wrong slots
Regards
Alex
07-14-2014 12:57 AM
Hi Alex,
Many thanks for your response that is exactly it! That document details it and I had just not seen this document, I'd read elsewhere that all the other supervisors go in slot 5 or 6 so I couldn't figure out why this one wouldn't go.
Thanks so much for your response.
Regards,
Tom
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide