MIB Extension - Cisco Catalyst 2960 -

[a.benhima]

Hi everyone, 

I would like to monitor a cisco catalyst 2960 provided with IOS v15. I accessed mib files and I found that many component are disabled or have no entry in it (check attachment).

So my question is : Can I extend the mib to support more OIDs ? and if so, I'll be glad if you give a tutorial or example !

Thank you so much.

Best regards,

[Kevin Dorrell · Accepted solution]

Your ipRouteTable and EGP MIBs are disabled because the 2960 is a layer-2 switch only, so it does not have any ip routing or EGP.  The MIBs will be disabled for features your switch does not support.

Kevin Dorrell

Luxembourg