04-05-2018 01:15 AM - edited 03-08-2019 02:32 PM
Hi,
Im planning a migration from this switch:
https://www.amazon.com/Cisco-WS-C3560-24TS-S-Catalyst-3560-24TS-Switch/dp/B0007VOF0I
to somthing newer, like this:
https://www.cisco.com/c/en/us/support/switches/catalyst-2960x-24ts-l-switch/model.html
My question is, according to various research i'm doing currently, can I upload configuration from older to newer?
best regards,
Maurycy
Solved! Go to Solution.
04-05-2018 02:52 AM
Hi Maurycy,
Yes, you can upload the configuration from older to newer switch.
But you have to take care of few things, like boot system command should not be there in old config.
It will be good if you will do copy and paste the configuration from old switch configuration to new switch, in this way you can remove the things which are not required for the new switch.
04-05-2018 02:52 AM
Hi Maurycy,
Yes, you can upload the configuration from older to newer switch.
But you have to take care of few things, like boot system command should not be there in old config.
It will be good if you will do copy and paste the configuration from old switch configuration to new switch, in this way you can remove the things which are not required for the new switch.
04-05-2018 02:56 AM
Thank you!
04-05-2018 03:07 AM
Thank you for the rating.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide