01-24-2007 02:39 PM - edited 03-05-2019 01:58 PM
Can the Expres 500 be configured for the switch port analyzer function ?
01-24-2007 03:30 PM
Hi there,
Catalyst Express 500 ports can be configured for SPAN only by using the Cisco Network Assistant (CNA):
HTH, please rate if helps,
Mohammed Mahmoud.
01-24-2007 03:32 PM
Hello teda
You can configure SPAN on the Catalyst Express 500 through Cisco Network Assistant 3.0 using the Diagnostics Smartports Port Role. From the Smartports window, simply select the Port Role and the ports for SPAN. Download Cisco Network Assistant 3.0 for free at http://www.cisco.com/go/cna.
Try this and let us know...
Raj
12-14-2007 06:38 AM
Hi,
is possible to configure two or more source ports that can be monitored in only one destination diagnostic port (SPAN)
Fabio
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide