ā10-30-2011 09:34 AM - edited ā03-07-2019 03:07 AM
Hi,
Can someone tell me please if 2650 and 2620 support MPLS ?
If yes what IOS version should i download?
Thanks
mahesh
Solved! Go to Solution.
ā10-31-2011 02:40 PM
ā10-31-2011 06:02 PM
mahesh
1-Make sure you DO NOT reboot the router. Now that you don't have an image if you reboot the router will go to Rommon
2-Can you ping the TFTP server from the router?
3-Can you ping the router from the TFTP server?
4-Did you turn on TFTP server on your PC/laptop?
Reza
ā10-30-2011 11:01 AM
Mahesh,
The 2600 does support MPLS
Try downloading 12.3(24a)
ENTERPRISE BASIC
HTH
ā10-30-2011 11:29 AM
Hi Reza,
Thanks for the reply.
I only have cisco channel partner access.
is there any other website i can download that software?
thanks
mahesh
ā10-30-2011 11:35 AM
Hi Mahesh,
You need a CCO account with valid smartnet contract to download IOS. The 2600 series is very old and unless you have extended warranty through Cisco, you can't put any IOS on it. I don't know what the channel partner account give you access to.
HTH
Reza
ā10-31-2011 01:18 PM
Hi Reza,
Thanks i was able to download the software to my PC.
Do you any TFTP server from where i can copy the IOS to the router?
Thanks
ā10-31-2011 02:40 PM
ā10-31-2011 05:19 PM
Hi,
I deleted the old flash from Router but unable to upgrade the IOS
getting this error
2620Router#copy tftp://192.168.20.17/c2600-j1s3-mz.123-26.bin flash:
Destination filename [c2600-j1s3-mz.123-26.bin]?
Accessing tftp://192.168.20.17/c2600-j1s3-mz.123-26.bin...
%Error opening tftp://192.168.20.17/c2600-j1s3-mz.123-26.bin (Timed out)
2620Router#sh flash
System flash directory:
No files in System flash
[0 bytes used, 16252924 available, 16252924 total]
16384K bytes of processor board System flash (Read/Write)
I am using solarwinds TFTP server.
Need help
thanks
mahesh
ā10-31-2011 06:02 PM
mahesh
1-Make sure you DO NOT reboot the router. Now that you don't have an image if you reboot the router will go to Rommon
2-Can you ping the TFTP server from the router?
3-Can you ping the router from the TFTP server?
4-Did you turn on TFTP server on your PC/laptop?
Reza
ā10-31-2011 07:13 PM
Hi Reza,
Many thanks for reply.
There was no connectivity between router and TFTP server which was on Laptop.
Router was not on my network.
I did the config on the router and after that i was able to upgrade the IOS on the router.
Thanks
mahesh
ā10-31-2011 06:03 PM
This means that your router cannot contact the TFTP server. Most likely caused by firewall or something.
ā11-01-2011 07:40 AM
One other show stopper. Since he is x many hops away, the last router to the destination will most likely need an IP helper address to the tftp server.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide