Recently there was change done on Wan link where the MTU was set to 9000. The same value has been set on the ISP end too. The Network connectivity is as given: CE1 ---- PE1 ---- PE2 ---- CE2
On the CE Interfaces connecting to PE's, the MTU has been set to 9000. ISP is informing that their end is also set to 9000. But the Max size i am able to Ping and get a reply is for 8982 and not 9000, that is, with or without the DF bit being set.
Ethernet is the media used. Router is ASR1006 and the Interface is on Module SPA-10X1GE-V2
10.1.1.2 is the CE2 Interface IP addr. NOTE. Hostname and IP addresses are modified to conceal the original.
CE1#ping 10.1.1.2 size 8982
Type escape sequence to abort. Sending 5, 8982-byte ICMP Echos to 10.1.1.2, timeout is 2 seconds: !!!!! Success rate is 100 percent (5/5), round-trip min/avg/max = 5/5/6 ms
CE1#ping 10.1.1.2 size 8983
Type escape sequence to abort. Sending 5, 8983-byte ICMP Echos to 10.1.1.2, timeout is 2 seconds: ..... Success rate is 0 percent (0/5)
CE1#ping 10.1.1.2 size 8982 df-bit
Type escape sequence to abort. Sending 5, 8982-byte ICMP Echos to 10.1.1.2, timeout is 2 seconds: Packet sent with the DF bit set !!!!! Success rate is 100 percent (5/5), round-trip min/avg/max = 5/9/24 ms
CE1#ping 10.1.1.2 size 8983 df-bit
Type escape sequence to abort. Sending 5, 8983-byte ICMP Echos to 10.1.1.2, timeout is 2 seconds: Packet sent with the DF bit set ..... Success rate is 0 percent (0/5)
Is this an expected behavior or something more should be done to make this work?
Don't forget that MTU at interface is for L2 frames. ICMP traffic has a L3 header that takes some bytes from L2 Data frame (in fact from MTU). You can also look at this discussion about ICMP: https://supportforums.cisco.com/discussion/11353141/icmp-packet-size
Hi team!I configuring ASA5506X with dual ISP obtaning ip addresses with dhcp...1. does this config looking correct?2. whay ASA doesn't accept both commands dhcp-client client-id interface OUTSIDE
dhcp-client client-id interface YOTA
Cisco helps build IT agility and business resiliency by introducing new technology innovations that help
Respond and adapt to disruptions
Accelerate your digital journey and cloud adoption
Transform your operating model with insights and automatio...
Oct 20, 2020 is an inspirational date for many of us in networking industry to be proud of. It is the birthday of Cisco Catalyst 8500 Series Edge Platforms – one of the most powerful purpose-built SD-WAN Edge platforms ever, making up to 60Gbps throughput...
Hi, Hope this can help someone. To connect local network storage, mine is DS1817+. Create port forward and connect thru internet.Do reply here if you have better or easier configuration! =D Configuration on Cisco Router:ip nat inside source stat...
Cisco SD-WAN Cloud OnRamp allows you to simplify and secure connectivity to cloud applications and public clouds. Interested in testing out the latest Cisco Cloud OnRamp solutions?
Sign up to try out various use cases with the Cisco SD-WAN Cloud ...