cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
156
Views
0
Helpful
2
Replies

multicast dropped

Fernandomunoz81
Level 1
Level 1

Hello,

We are currently routing multicast traffic towards a router that is outside the scope of our project management tasks. Although we have verified that the t

raffic is reaching the router, it appears to be getting dropped at that point. We are using PIM Dense mode for propagation.

Upon reviewing the router's configuration, we noticed that "ip pim snooping" is enabled globally. Could this be causing the issue?

Thank you for your assistance

2 Accepted Solutions

Accepted Solutions

Joseph W. Doherty
Hall of Fame
Hall of Fame

Possibly.  PIM snooping is the Cisco IGMP snooping like feature for routers.  It might drop the multicast as, with DM, the multicast wasn't requested.

View solution in original post

M02@rt37
VIP
VIP

Hello @Fernandomunoz81 

Since you are in PIM DM, you can disable IGMP snooping , unless there's a specific need for it.

Best regards
.ı|ı.ı|ı. If This Helps, Please Rate .ı|ı.ı|ı.

View solution in original post

2 Replies 2

Joseph W. Doherty
Hall of Fame
Hall of Fame

Possibly.  PIM snooping is the Cisco IGMP snooping like feature for routers.  It might drop the multicast as, with DM, the multicast wasn't requested.

M02@rt37
VIP
VIP

Hello @Fernandomunoz81 

Since you are in PIM DM, you can disable IGMP snooping , unless there's a specific need for it.

Best regards
.ı|ı.ı|ı. If This Helps, Please Rate .ı|ı.ı|ı.