cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1227
Views
0
Helpful
9
Replies

@Multiple gateway in one router

innoalok
Level 1
Level 1

I have one internet connection,

And to do isolation our network for different location which is connected via Radio frequency

I have need more than one gateway for different location to do network isolation.

i have to distribute gateway for site one as:168.192.110.1

i have to distribute gateway for site two as:168.192.111.1

i have to distribute gateway for site two as:168.192.112.1

how it is possible to do by one internet connection

 

 

 

1 Accepted Solution

Accepted Solutions

Hi,

can you elaborate more with sample diagram to understand the exact situation .

Please rate this and mark as solution/answer, if this resolved your issue
Good luck
KB

View solution in original post

9 Replies 9

Hi,

can you elaborate more with sample diagram to understand the exact situation .

Please rate this and mark as solution/answer, if this resolved your issue
Good luck
KB

Hello,

 

just out of curiosity, how did you finally resolve this ? Can you post the working configs for reference ?

can add more gateway in one router.jpeg

Hi, best possible way to do this is sub interfaces. you can have different VLANs for each location and create sub interfaces on router to each VLAN. then it will do the routing between VLANs and you can send traffic towards internet.

https://www.omnisecu.com/cisco-certified-network-associate-ccna/what-is-a-subinterface-in-a-cisco-router.php

Please rate this and mark as solution/answer, if this resolved your issue
Good luck
KB

Hi Kasun,

In which cisco router we can create sub interface,

may i create in any router which provide GUI mode

Kasun my whatsapp number is 9031674789

i am an indian can we talk on voice.

Thanks

 

Hello,

 

thanks for posting the final diagram, not sure if I fully understand the solution, but either way, glad you got it resolved !

Hello,

 

tunnels could be an option. I agree with @Kasun Bandara that a network topology diagram is needed...

Hello


@innoalok wrote:

I have one internet connection,

And to do isolation our network for different location which is connected via Radio frequency

I have need more than one gateway for different location to do network isolation.




Create sub interfaces on the single interface assign them into their own virtual routing instance ( VRF)

 

 


Please rate and mark as an accepted solution if you have found any of the information provided useful.
This then could assist others on these forums to find a valuable answer and broadens the community’s global network.

Kind Regards
Paul

In which Router VRF Feature will enable,

Do you know any one Cisco Router which Have enable Multiple Gateway..

Review Cisco Networking for a $25 gift card