Multiple subnetworks in VLAN

[lubosbella]

Hi,

can someone help me with this problem?:

I have c6500 with 2 vlans.

First: vlan10 is using ip subnet 192.168.100.0/24...clients are using default gateway 192.168.100.1

Second Vlan20 use subnet space 192.168.101.0/24...clients gateway is 192.168.101.1

In vlan10 will be SAN network with IP space 172.16.1.0/24 and in vlan20 SAN with subnet 172.16.2.0/24. I need these subnets 172.16.x.x will be visible and SANs can be replicated. How to configure c6500 to allow comunication???.

Thanks.

[andrew.prince]

Lubo,

Having a remotely managed switch is always the best way forward, saves the walking to perform configurations!

If you have a trunk between the 2 buildings, then you can have the physical equipment in either building in the same vlan - which would be very nice.