05-05-2010 09:53 AM - edited 03-06-2019 10:56 AM
Hi,
I have configured class-map which matches based on access-group
this accessgroup is configured to match one specific host
i created a policymap and add this classmap under this and i specified "drop" action (Just for testing; assuming all the traffic thro the host wll be dropped-Is is correct ???)
Add the service policy command in WAN interface in Input direction (so the download will be affected)
when i verified access-list is matched but not the class-map
Where iam wrong
Any suggestions
05-05-2010 11:33 AM
Can you post the configuration and a short description of traffic direction.
Regards,
jerry
05-05-2010 01:13 PM
Class-map match-any dropall
match accessgroup MYPC
policy-map MYPOLICY
class dropall /*earlier i specified same bandwidth value /
drop
Int fa0/1 /*my WAN interface*/
serive policy input MYPOLICY
Ip access-list extended MYPC
10 permit host 10.29.10.10 any
This i did to make sure that QOS which i configured is working fine or not
becuase iam not able to verify (Frankly saying i dont know ) it
Just i want to limit the download speed of this particular pc when he is accessing WAN so i applied in input direction in WAN
In lan interface there is nothing .related to this
Thanks
Hari
05-05-2010 01:21 PM
Your ACL is wrong, you are matching the traffic in the wrong direction.
Assuming you mean download from the Internet
Internet -> F0/1 Router -> PC (10.29.10.10)
the ACL should be like the follow
ip access-list extended MYPC
permit ip any host 10.29.10.10
HTH,
jerry
05-05-2010 01:30 PM
My Network is Like this
Internet====
Yes you are right i will check and
reply tomorrow
Thanks for your time
Hari
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide