N9K NXOS 7.0(3)I1(2) Command "logging origin-id hostname"

[Saran Komgris]

Hi,

The command "logging origin-id hostname" on NXOS seems to not work with version 7.0(3)I1(2), how to solve the problem? Syslog server did not see the originator switch N9K coming in.

I found this from https://community.cisco.com/t5/switching/is-there-a-similar-command-in-nx-os-quot-logging-origin-id/td-p/2085457 

Nexus 5500 has this command available on 7.3(0)N1(1) or 7.2(1)N1(1) or later.

Nexus 7000 has this command available on 6.2(2) or later.

What about N9K? Currently run version 7.0(3)I1(2).

Thanks,

[balaji.bandi]

I used nexus 9K 7.X nexus code it works  as expected below :

logging origin-id {hostname | ip ip-address | string text-string}

Example:

switch(config)# logging origin-id string n9k-switch-abc

[pongsatornrungrueang0327]

I have this problem.

I use N9K-C9372TX NXOS: version 7.0(3)I1(2)

can't run command

[balaji.bandi]

as per the config guide the syntax supported : (just tested on nexus 7K i have access it works) - even my LaB 9K with 9.3 copde works.

Configuring the Origin ID for Syslog Messages

https://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus9000/sw/7-x/system_management/configuration/guide/b_Cisco_Nexus_9000_Series_NX-OS_System_Management_Configuration_Guide_7x/b_Cisco_Nexus_9000_Series_NX-OS_System_Management_Configuration_...