07-14-2013 05:21 PM - edited 03-07-2019 02:23 PM
Im so close to connecting to the internet, the CD light is solid, the data light is flashing and the router has received an ip from the ISP. I believe I havent configured the NAT correctly so any help would be greatly appreciated. Below is the running config, thanks in advance to any kind souls who are willing to help!
Router#show running-config
Building configuration...
Current configuration : 2065 bytes
!
! Last configuration change at 00:15:39 UTC Mon Mar 1 1993 by admin
!
version 15.0
no service pad
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
!
hostname Router
!
boot-start-marker
boot-end-marker
!
!
no aaa new-model
memory-size iomem 10
!
!
ip source-route
!
!
!
ip dhcp pool LANDHCPPool
network 192.168.0.0 255.255.255.0
default-router 192.168.0.1
dns-server 208.67.222.222
!
!
ip cef
!
!
license udi pid CISCO867-K9 sn FGL15042DPJ
!
!
username XXXX privilege 15 password 0 XXXXXXXX
!
!
ip ssh rsa keypair-name sshkeys
ip ssh version 2
!
!
!
!
!
!
!
interface ATM0
no ip address
ip flow ingress
load-interval 60
no atm ilmi-keepalive
!
interface ATM0.1 point-to-point
description adsl point-to-point connection
bandwidth 512
bandwidth receive 6000
ip flow ingress
pvc 0/100
encapsulation aal5mux ppp dialer
dialer pool-member 1
!
!
interface FastEthernet0
!
interface FastEthernet1
!
interface FastEthernet2
!
interface FastEthernet3
!
interface Vlan1
description lan
ip address 192.168.0.1 255.255.255.0
!
interface Dialer0
bandwidth 6000
bandwidth receive 512
ip address negotiated
ip access-group internetinbound in
no ip proxy-arp
ip nbar protocol-discovery
ip flow ingress
ip nat outside
ip virtual-reassembly
encapsulation ppp
load-interval 60
dialer pool 1
dialer-group 1
ppp authentication pap callin
ppp pap sent-username XXXXXXXX password 0 XXXXXXXXX
ppp ipcp dns accept
no cdp enable
!
ip forward-protocol nd
no ip http server
no ip http secure-server
!
ip nat inside source list word interface Dialer0 overload
ip route 0.0.0.0 0.0.0.0 Dialer0
!
ip access-list extended LanInbound
permit ip any any
permit icmp any any
!
access-list 1 permit 192.168.0.0 0.0.0.255
dialer-list 1 protocol ip permit
!
control-plane
!
!
line con 0
no modem enable
line aux 0
line vty 0 4
access-class 1 in
exec-timeout 30 0
privilege level 15
login local
transport preferred ssh
transport input ssh
!
scheduler max-task-time 5000
end
07-15-2013 07:10 AM
What access list is (ip nat inside source list word interface Dialer0 overload) pointing to?
07-15-2013 08:23 AM
run show ip nat ? to get a list of commands to verity that nat is working
07-15-2013 08:05 AM
Add "ip nat inside" to Vlan 1 interface. Must be:
interface Vlan1
description lan
ip address 192.168.0.1 255.255.255.0
ip nat inside
As explained from Peterace1 add an access-list "word" like this:
ip access-list extended word
permit ip 192.168.0.0 0.0.0.255 any
Regards.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: