07-14-2013 05:21 PM - edited 03-07-2019 02:23 PM
Im so close to connecting to the internet, the CD light is solid, the data light is flashing and the router has received an ip from the ISP. I believe I havent configured the NAT correctly so any help would be greatly appreciated. Below is the running config, thanks in advance to any kind souls who are willing to help!
Router#show running-config
Building configuration...
Current configuration : 2065 bytes
!
! Last configuration change at 00:15:39 UTC Mon Mar 1 1993 by admin
!
version 15.0
no service pad
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
!
hostname Router
!
boot-start-marker
boot-end-marker
!
!
no aaa new-model
memory-size iomem 10
!
!
ip source-route
!
!
!
ip dhcp pool LANDHCPPool
network 192.168.0.0 255.255.255.0
default-router 192.168.0.1
dns-server 208.67.222.222
!
!
ip cef
!
!
license udi pid CISCO867-K9 sn FGL15042DPJ
!
!
username XXXX privilege 15 password 0 XXXXXXXX
!
!
ip ssh rsa keypair-name sshkeys
ip ssh version 2
!
!
!
!
!
!
!
interface ATM0
no ip address
ip flow ingress
load-interval 60
no atm ilmi-keepalive
!
interface ATM0.1 point-to-point
description adsl point-to-point connection
bandwidth 512
bandwidth receive 6000
ip flow ingress
pvc 0/100
encapsulation aal5mux ppp dialer
dialer pool-member 1
!
!
interface FastEthernet0
!
interface FastEthernet1
!
interface FastEthernet2
!
interface FastEthernet3
!
interface Vlan1
description lan
ip address 192.168.0.1 255.255.255.0
!
interface Dialer0
bandwidth 6000
bandwidth receive 512
ip address negotiated
ip access-group internetinbound in
no ip proxy-arp
ip nbar protocol-discovery
ip flow ingress
ip nat outside
ip virtual-reassembly
encapsulation ppp
load-interval 60
dialer pool 1
dialer-group 1
ppp authentication pap callin
ppp pap sent-username XXXXXXXX password 0 XXXXXXXXX
ppp ipcp dns accept
no cdp enable
!
ip forward-protocol nd
no ip http server
no ip http secure-server
!
ip nat inside source list word interface Dialer0 overload
ip route 0.0.0.0 0.0.0.0 Dialer0
!
ip access-list extended LanInbound
permit ip any any
permit icmp any any
!
access-list 1 permit 192.168.0.0 0.0.0.255
dialer-list 1 protocol ip permit
!
control-plane
!
!
line con 0
no modem enable
line aux 0
line vty 0 4
access-class 1 in
exec-timeout 30 0
privilege level 15
login local
transport preferred ssh
transport input ssh
!
scheduler max-task-time 5000
end
07-15-2013 07:10 AM
What access list is (ip nat inside source list word interface Dialer0 overload) pointing to?
07-15-2013 08:23 AM
run show ip nat ? to get a list of commands to verity that nat is working
07-15-2013 08:05 AM
Add "ip nat inside" to Vlan 1 interface. Must be:
interface Vlan1
description lan
ip address 192.168.0.1 255.255.255.0
ip nat inside
As explained from Peterace1 add an access-list "word" like this:
ip access-list extended word
permit ip 192.168.0.0 0.0.0.255 any
Regards.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide