11-01-2010 07:33 AM - edited 03-06-2019 01:49 PM
Dear Experts,
I am an absolute newbie in cisco networking land. I was assinged a task to quickly deploy new 2900 router and 5500 ASA firewall for our small network.
Although I read through dozens of technical manuals, still feeling not confident enough to put into production the new devices with my own configuration.
For experts it must be very easy because as you can see from below schema, our network is simple and straighforward.
I would be very grateful if you kindly write routing entries for the router and firewall so that I could compare with my own and correct my mistakes if any.
Thank you very much in advance,
=========
INTERNET
=========
|
|
--------
[e0/0] (IP unnumbered, PPPoE Dialer0)
|
| Router |
|
[e0/1] (204.105.234.25/29 - IP Unnumbered configuration uses this address for TCPIP processing)
--------
|
|
----------
[e0/0] (204.105.234.30/29 - This is the public address for internal users
| Static NAT between e0/0 and e0/2 for both WEBSERVER and DNSSERVER
| |FIREWALL | - e0/2 (10.1.1.1/32 - This is DMZ network interface) - WEBSERVER 10.1.1.10 and DNSSERVER 10.1.11
|
| Static outbound NAT between e0/0 and e/1
[e0/1] (192.168.2.0/22 - This is gateway for internal users)
Solved! Go to Solution.
11-01-2010 08:46 AM
Ken
Please don't post into multiple forums it just confuses things.
Can we post into LAN Switching and Routing for this question - thanks.
Jon
11-01-2010 08:46 AM
Ken
Please don't post into multiple forums it just confuses things.
Can we post into LAN Switching and Routing for this question - thanks.
Jon
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide