10-16-2015 05:25 AM - edited 03-08-2019 02:14 AM
Hi there,
I know that the Nexus 5596UP with L3 card doesn't support WCCP (even with Version 7). will 5548UP be any different?
Thanks,
Ahmed
10-16-2015 05:31 AM
Hi,
The only difference between the 2 models is the numbers of ports (48 vs 96), but they both used the same software version. So, if the 5596 does not support it the same applies to 5548.
HTH
10-16-2015 10:42 PM
Hi there, I know that the Nexus 5596UP with L3 card doesn't support WCCP (even with Version 7). will 5548UP be any different? Thanks, Ahmed
Hi Ahmed,
WCCP feature supported platform under nexus family comes with N7k not with N5k. Also Data sheet doesn't show that listed feature as well.
http://www.cisco.com/c/en/us/products/collateral/switches/nexus-5000-series-switches/data_sheet_c78-618603.html
Hope it Helps..
-GI
Rate if it Helpss.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide