Nexus 9000 ACL logs Not Sending To Syslog

[jamie.mai]

Hello, I have logging set up and see some logs getting to the syslog server, however none of the ACL logging is going there. I see the ACL logs with show logging ip access-list cache but not in show logging or on the syslog server. I haven't found documentation that explains this, if someone could point me to specific documentation or has any ideas on this I would appreciate it. We have tried different logging levels, etc and so far nothing, thanks!

[balaji.bandi · Accepted solution]

check the below document can help you :

https://www.cisco.com/c/en/us/support/docs/switches/nexus-7000-series-switches/118907-configure-nx7k-00.html

[Georg Pauwen · Accepted solution]

Hello,

I don't know if the N9K works the same as the N7K in this regard, but make sure your logging levels are configured with equal or higher values:

N9K(config)# logging level acllog 3
N9K(config)# acllog match-log-level 3
N9K(config)# logging logfile [name] 3

[jamie.mai]

Thank you both, not sure what I had wrong exactly but resetting the logging levels again and it is working now.