Solved: Hi Paul, thanks for your

gsancassano · ‎02-01-2017

Hi all,

I´m configuring VRF route leaking between 3 VRF (SERVICES, AAA, BBB) using VRF-Lite as shown in the configuration below.
With this configuration, VRF AAA and BBB will learn the 4 static route from VRF SERVICES.

I would like to know if there is a way to only learn route 10.10.10.0 and 10.20.20.0 in VRF AAA and only routes 10.30.30.0 and 10.40.40.0 in VRF BBB. In

other words, I would like to filter witch route are learn form SERVICES in VRF AAA and VRF BBB.

Thanks in advance.

======================Config===================================
!
ip prefix-list MAP-SERVICES seq 5 permit 10.10.10.0/24
ip prefix-list MAP-SERVICES seq 10 permit 10.20.20.0/24
ip prefix-list MAP-SERVICES seq 15 permit 10.30.30.0/24
ip prefix-list MAP-SERVICES seq 20 permit 10.40.40.0/24
ip prefix-list MAP-AAA seq 5 permit 100.100.100.0/24
ip prefix-list MAP-BBB seq 5 permit 200.200.200.0/24
!
!
route-map MAP-SERVICES permit 10
match ip address prefix-list MAP-SERVICES
!
route-map MAP-AAA permit 10
match ip address prefix-list MAP-AAA
!
route-map MAP-BBB permit 10
match ip address prefix-list MAP-BBB
!
!
vrf context SERVICES
ip route 10.10.10.0/24 10.1.1.1 !(for VRF AAA) ip route 10.20.20.0/24 10.1.1.1 !(for VRF AAA) ip route 10.30.30.0/24 10.1.1.1 !(for VRF BBB) ip

route 10.40.40.0/24 10.1.1.1 !(for VRF BBB)
address-family ipv4 unicast
    route-target import 65500:2
    route-target import 65500:3
    route-target export 65500:1
!
vrf context AAA
address-family ipv4 unicast
    route-target import 65500:1
    route-target export 65500:2
!
vrf context BBB
address-family ipv4 unicast
    route-target import 65500:1
    route-target export 65500:3
!
!
interface Vlan100 description AAA no shutdown vrf member AAA ip address 100.100.100.1/24
!
interface Vlan200 description BBB no shutdown vrf member BBB ip address 200.200.200.1/24
!
!
router bgp 65500
vrf SERVICES
    address-family ipv4 unicast
      redistribute static route-map MAP-SERVICES
vrf AAA
    address-family ipv4 unicast
      redistribute direct route-map MAP-AAA
vrf BBB
    address-family ipv4 unicast
      redistribute direct route-map MAP-BBB
!

======================End_Config===================================

Paul Chapman · ‎02-06-2017

Hi -

After some digging I found a reference to an "import map" which will allow you to filter the routes as they are leaked between the VRFs.

http://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus9000/sw/7-x/command_references/configuration_commands/b_Using_N9K_Config_Commands/b_N9K_Bookmap_chapter_010101.html#wp1300260430

PSC

View solution in original post

willwetherman · ‎02-09-2017

Hi,

The import-map feature as suggested by Paul should work as I have a similar setup on a pair of Nexus 9Ks.

Note that the route-target import 65500:1 command still needs to be applied to the AAA and BBB VRFs to trigger the import of the Services prefixes. The import map filter is then applied before the prefixes are imported into the routing table

Try the following:

ip prefix-list IMPORT-AAA seq 5 permit 10.10.10.0/24
ip prefix-list IMPORT-AAA seq 10 permit 10.20.20.0/24
!
ip prefix-list IMPORT-BBB seq 5 permit 10.30.30.0/24
ip prefix-list IMPORT-BBB seq 10 permit 10.40.40.0/24
!
route-map IMPORT-MAP-AAA permit 10
match ip address prefix-list IMPORT-AAA
!
route-map IMPORT-MAP-BBB permit 10
match ip address prefix-list IMPORT-BBB
!
vrf context AAA
address-family ipv4 unicast
    route-target import 65500:1
    import map IMPORT-MAP-AAA
!
vrf context BBB
address-family ipv4 unicast
    route-target import 65500:1
    import map IMPORT-MAP-BBB

Hope this helps

View solution in original post

Paul Chapman · ‎02-02-2017

Hi -

I see your import/exports for the route targets, but I don't see that you actually defined your RDs in the vrf configuration.

vrf context SERVICES
 rd 65500:1
vrf context AAA
 rd 65500:2
vrf context BBB
 rd 65500:3

PSC

gsancassano · ‎02-03-2017

Hi Paul, thanks for your answer.

I haven't define the RDs in the different VRF because I'm using VRF-Lite and as I know is not need to import/export routes.

The config I provided is working fine, the only thing I would like to change is the routers learned from SERVICES in VRF AAA and BBB.

Paul Chapman · ‎02-03-2017

Hi -

Can you post a "show ip route vrf all"?

PSC

gsancassano · ‎02-06-2017

Hi Paul,

Here is the output of the "show ip route vrf all"

Thanks for any suggestion on how can I filter which route are learned from SERVICES to AAA and BBB.

N9k# sh ip route vrf all
IP Route Table for VRF "default"
'*' denotes best ucast next-hop
'**' denotes best mcast next-hop
'[x/y]' denotes [preference/metric]
'%<string>' in via output denotes VRF <string>

IP Route Table for VRF "management"
'*' denotes best ucast next-hop
'**' denotes best mcast next-hop
'[x/y]' denotes [preference/metric]
'%<string>' in via output denotes VRF <string>

10.22.1.0/24, ubest/mbest: 1/0, attached
    *via 10.22.1.248, mgmt0, [0/0], 00:06:40, direct
10.22.1.248/32, ubest/mbest: 1/0, attached
    *via 10.22.1.248, mgmt0, [0/0], 00:06:40, local

IP Route Table for VRF "SERVICES"
'*' denotes best ucast next-hop
'**' denotes best mcast next-hop
'[x/y]' denotes [preference/metric]
'%<string>' in via output denotes VRF <string>

10.10.10.0/24, ubest/mbest: 1/0
    *via 10.1.1.1, [1/0], 00:00:33, static
10.20.20.0/24, ubest/mbest: 1/0
    *via 10.1.1.1, [1/0], 00:00:33, static
10.30.30.0/24, ubest/mbest: 1/0
    *via 10.1.1.1, [1/0], 00:00:33, static
10.40.40.0/24, ubest/mbest: 1/0
    *via 10.1.1.1, [1/0], 00:00:33, static
10.1.1.0/29, ubest/mbest: 1/0, attached
    *via 10.1.1.2, Vlan3100, [0/0], 00:04:04, direct
10.1.1.2/32, ubest/mbest: 1/0, attached
    *via 10.1.1.2, Vlan3100, [0/0], 00:04:04, local
100.100.100.0/24, ubest/mbest: 1/0, attached
    *via vrf BBB, Vlan100, [20/0], 00:04:04, bgp-65500, external, tag 65500
200.200.200.0/24, ubest/mbest: 1/0, attached
    *via 172.21.4.248%AAA, Vlan200, [20/0], 00:04:04, bgp-65500, external, tag 65500
IP Route Table for VRF "AAA"
'*' denotes best ucast next-hop
'**' denotes best mcast next-hop
'[x/y]' denotes [preference/metric]
'%<string>' in via output denotes VRF <string>

10.10.10.0/24, ubest/mbest: 1/0
    *via 10.1.1.2%SERVICES, [20/0], 00:04:04, bgp-65500, external, tag 65500
10.20.20.0/24, ubest/mbest: 1/0
    *via 10.1.1.2%SERVICES, [20/0], 00:04:04, bgp-65500, external, tag 65500
10.30.30.0/24, ubest/mbest: 1/0
    *via 10.1.1.2%SERVICES, [20/0], 00:04:04, bgp-65500, external, tag 65500
10.40.40.0/24, ubest/mbest: 1/0
    *via 10.1.1.2%SERVICES, [20/0], 00:04:04, bgp-65500, external, tag 65500
200.200.200.0/24, ubest/mbest: 1/0, attached
    *via 200.200.200.1, Vlan200, [0/0], 00:04:04, direct
200.200.200.1/32, ubest/mbest: 1/0, attached
    *via 200.200.200.1, Vlan200, [0/0], 00:04:04, local

IP Route Table for VRF "BBB"
'*' denotes best ucast next-hop
'**' denotes best mcast next-hop
'[x/y]' denotes [preference/metric]
'%<string>' in via output denotes VRF <string>

10.10.10.0/24, ubest/mbest: 1/0
    *via 10.1.1.2%SERVICES, [20/0], 00:04:04, bgp-65500, external, tag 65500
10.20.20.0/24, ubest/mbest: 1/0
    *via 10.1.1.2%SERVICES, [20/0], 00:04:04, bgp-65500, external, tag 65500
10.30.30.0/24, ubest/mbest: 1/0
    *via 10.1.1.2%SERVICES, [20/0], 00:04:04, bgp-65500, external, tag 65500
10.40.40.0/24, ubest/mbest: 1/0
    *via 10.1.1.2%SERVICES, [20/0], 00:04:04, bgp-65500, external, tag 65500
100.100.100.0/24, ubest/mbest: 1/0, attached
    *via 100.100.100.1, Vlan100, [0/0], 00:04:04, direct
100.100.100.1/32, ubest/mbest: 1/0, attached
    *via 100.100.100.1, Vlan100, [0/0], 00:04:04, local
N9k#

Paul Chapman · ‎02-06-2017

Hi -

After some digging I found a reference to an "import map" which will allow you to filter the routes as they are leaked between the VRFs.

http://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus9000/sw/7-x/command_references/configuration_commands/b_Using_N9K_Config_Commands/b_N9K_Bookmap_chapter_010101.html#wp1300260430

PSC

gsancassano · ‎02-07-2017

Hi Paul,

I thought that "import map" command only allow import routes from the Default VRF to others VRF.

I will try it an then post my results.

gsancassano · ‎02-09-2017

Hi Paul,

I made some tests using "import map" but unfortunately I don't get working what I wanted.

Could you share an example of import route using "import map" were I can filter which route import form one VRF to another?

Thanks in advance.

willwetherman · ‎02-09-2017

Hi,

The import-map feature as suggested by Paul should work as I have a similar setup on a pair of Nexus 9Ks.

Note that the route-target import 65500:1 command still needs to be applied to the AAA and BBB VRFs to trigger the import of the Services prefixes. The import map filter is then applied before the prefixes are imported into the routing table

Try the following:

ip prefix-list IMPORT-AAA seq 5 permit 10.10.10.0/24
ip prefix-list IMPORT-AAA seq 10 permit 10.20.20.0/24
!
ip prefix-list IMPORT-BBB seq 5 permit 10.30.30.0/24
ip prefix-list IMPORT-BBB seq 10 permit 10.40.40.0/24
!
route-map IMPORT-MAP-AAA permit 10
match ip address prefix-list IMPORT-AAA
!
route-map IMPORT-MAP-BBB permit 10
match ip address prefix-list IMPORT-BBB
!
vrf context AAA
address-family ipv4 unicast
    route-target import 65500:1
    import map IMPORT-MAP-AAA
!
vrf context BBB
address-family ipv4 unicast
    route-target import 65500:1
    import map IMPORT-MAP-BBB

Hope this helps

gsancassano · ‎02-10-2017

Hi,

I made some new tests with the "import map" command and now is working.

Thnaks to all.

Cormac Champion · ‎01-16-2018

To leak routes between the Default VRF and another created VRF, should I be doing something like this ?

ip prefix-list IMPORT-AAA seq 5 permit 10.10.10.0/24
ip prefix-list IMPORT-AAA seq 10 permit 10.20.20.0/24
!
ip prefix-list EXPORT-BBB seq 5 permit 10.30.30.0/24
ip prefix-list EXPORT-BBB seq 10 permit 10.40.40.0/24
!
route-map IMPORT-MAP-AAA permit 10
match ip address prefix-list IMPORT-AAA
!
route-map EXPORT-MAP-BBB permit 10
match ip address prefix-list EXPORT-BBB
!
vrf context AAA
address-family ipv4 unicast
route-target both 1:1
import map IMPORT-MAP-AAA

import map EXPORT-MAP-BBB

!

I tried this but no joy

Nexus 9k VRF-Lite route leaking filter