01-27-2015 02:28 AM - edited 03-07-2019 10:23 PM
Hi Everyone,
We are using nexus switches in our network. Can anyone of you please let me know what is the command to check logs for specific interface. I am using #show log |i eth1/2. I am not sure is this correct but when I use this I get nothing.
Please help me to provide command to check interface logs.
Thank you!
01-27-2015 04:25 AM
try "show log | i Ethernet1/2"
include command is case sensitive and match whole word
01-27-2015 07:36 AM
Hi tommy! thanks for your response but this didn't work
01-27-2015 09:41 AM
Do you know if there's any logs about Ethernet1/2 interface?
show log | i Ethernet1/2 -- should work, but I am not sure if you're using FEX
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide