Nexus Issue Config-Sync - DB Locked type 1

[rcavezzale]

Hi all,

Today I have tried to configure "conf-sync" between two nexus 5k without success.
in detail the Database now is locked on one Nexus and I can't change anything (nothing remove the switch-profile).
The version of OS is 7.2(0)N1 on both devices.
I already tried to reboot the device.

interface mgmt0
description "Link To Ber - ge4/0/46"
vrf member management
ip address 172.18.3.243/24

switch-profile : vPC
----------------------------------------------------------

Start-time: 702258 usecs after Mon Jan 23 14:21:29 2017
End-time: -

Profile-Revision: 1
Session-type: -
Session-subtype: -
Peer-triggered: No
Profile-status: -

Local information:
----------------
Status: -
Error(s):

Peer information:
----------------
IP-address: 172.18.3.242 --> mgmt0 of the other Nexus.
Sync-status: Not yet merged
Merge Flags: pending_merge:1 rcv_merge:0 pending_validate:0
Status: -
Error(s):

show system internal csm global info

No of sessions: 1 (Max: 32)

Total number of commands: 0 (Max: 102400)

Session Database Lock Info: locked

   Client: 1 (1: SSN, 2: CONF-T)

   ID: 1

   Name: vPC (switch-profile session)

test csm ssn-db-lock reset SSN

ERROR: Failed to reset Session DB lock(can't reset lock taken by SSN)

[Mark Malone]

Hi

thats strange a reboot should have cleared it , even though you don't really want to be rebooting dc switches unless you have too

did you try first............. test csm ssn-db-lock reset conf-t

[rcavezzale]

Thanks for reply, but  unfortunately this command not worked because the DB is locked in type 1 not type 2

test csm ssn-db-lock reset conf-t
ERROR: Lock type mismatch !!. Session DB currently owned byclient type 1

do you have other ideas?

[Mark Malone]

Hi

have you seen this link there's another method , if that doesn't work personally I would TAC it

http://www.cisco.com/c/en/us/support/docs/switches/nexus-5000-series-switches/119028-troubleshoot-cfs-nx5k-00.html

[rcavezzale]

already tried this document without success.

Unfortunately the CFS application lock is the session-mgr and is not clearable with the command "clear <application> session" and it is not visualize under internal processes.

Thanks for your support