I have two Nexus 93180YC-FX in VPC mode. One ESX is actually connected : 2 links 10gbps on each Nexus with a VPC.
The load balance on Nexus side is : port-channel load-balance src-dst ip
The Nexus or used only on level 2 and devices like ESX have the level 3.
My problem is : only one link, between the Nexus and the ESX, is used for the traffic and it's always the same. I know there is a role priority between both Nexus but I would like both Nexus / links take the traffic to the ESX 50/50. Is it possible in VPC mode ?
Nexus's settings :
the ESX's conf seemes good because on a standalone Nexus (no VPC), the trafic passes both 10Gbps links.
Is the role primary / secondary could be the problem like a role active / standby ?