cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements

Cisco Community Designated VIP Class of 2020

1280
Views
0
Helpful
17
Replies
Highlighted
Beginner

Re: No flash memory in 2621 router

Also, if the flash problem prevents you from upgrading the IOS on the device, then try putting a 'stable' image (such as the one I suggested previously) on a server, and boot from a TFTP server instead of from flash

Beginner

Re: No flash memory in 2621 router

Thaks for all the suggestions. As soon as I get the opportunity I'm going to open these routers up and look at them.

If there is nothing obvious I am going to boot an IOS from TFTP and see what that does.

Beginner

Re: No flash memory in 2621 router

I just openned up one of my cisco 2600's with the problem I've documented.

There was flash memory installed but obviously it wasn't recognized.

I removed the flash meory that was installed and placed a spare 8mb strip I had laying around

Sure enough I was able to see flash memory with the a different stick installed.

Conclusion, something is corruted with the flash memory that was installed, and I will be replacing it.

thanks for all the help !!!!!!!!!!!!!!!!!!!!!

CreatePlease to create content
Content for Community-Ad