cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
2630
Views
0
Helpful
4
Replies

No IP from DHCP server with ip-helper

Clement BONNAL
Level 1
Level 1

Hello,

I've a Cisco 1941W router which is DHCP server for data-VLANs and uses ip-helper for voice-VLANs.

Wired IP Phones (VLAN 100) gets IP successfully, but WiFi IP Phones (VLAN 101) doesn't.

Here is the trace of DHCP debug for VLAN101 which is NOK:

001898: *Jun 13 14:04:00.046: DHCPD: client's VPN is .

001899: *Jun 13 14:04:00.046: DHCPD: No option 125

001900: *Jun 13 14:04:00.046: DHCPD: Sending notification of DISCOVER:

001901: *Jun 13 14:04:00.046:   DHCPD: htype 1 chaddr 649e.f3b6.85da

001902: *Jun 13 14:04:00.046:   DHCPD: remote id 020a00000a432131fd000000

001903: *Jun 13 14:04:00.046:   DHCPD: circuit id 00000000

001904: *Jun 13 14:04:00.046: DHCPD: DHCPDISCOVER received from client 0164.9ef3.b685.da on interface BVI101.

001905: *Jun 13 14:04:00.046: DHCPD: Seeing if there is an internally specified pool class:

001906: *Jun 13 14:04:00.046:   DHCPD: htype 1 chaddr 649e.f3b6.85da

001907: *Jun 13 14:04:00.046:   DHCPD: remote id 020a00000a432131fd000000

001908: *Jun 13 14:04:00.046:   DHCPD: circuit id 00000000

001909: *Jun 13 14:04:00.046: DHCPD: there is no address pool for 10.67.33.49.

001910: *Jun 13 14:04:00.046: DHCPD: setting giaddr to 10.67.33.49.

001911: *Jun 13 14:04:00.046: DHCPD: BOOTREQUEST from 0164.9ef3.b685.da forwarded to 198.19.255.21.

001912: *Jun 13 14:04:00.046: DHCPD: BOOTREQUEST from 0164.9ef3.b685.da forwarded to 198.19.255.22.

And for VLAN 100 which is OK:

002781: *Jun 13 14:19:20.646: DHCPD: client's VPN is .

002782: *Jun 13 14:19:20.646: DHCPD: No option 125

002783: *Jun 13 14:19:20.646: DHCPD: DHCPREQUEST received from client 0150.57a8.876b.14.

002784: *Jun 13 14:19:20.646: DHCPD: no subnet configured for 10.65.33.58.

002785: *Jun 13 14:19:20.646: DHCPD: Finding a relay for client 0150.57a8.876b.14 on interface Vlan100.

002786: *Jun 13 14:19:20.646: DHCPD: Seeing if there is an internally specified pool class:

002787: *Jun 13 14:19:20.646:   DHCPD: htype 1 chaddr 5057.a887.6b14

002788: *Jun 13 14:19:20.646:   DHCPD: remote id 020a00000a41213101000064

002789: *Jun 13 14:19:20.646:   DHCPD: circuit id 00000000

002790: *Jun 13 14:19:20.646: DHCPD: there is no pool for 10.65.33.49.

002791: *Jun 13 14:19:20.646: DHCPD: setting giaddr to 10.65.33.49.

002792: *Jun 13 14:19:20.646: DHCPD: BOOTREQUEST from 0150.57a8.876b.14 forwarded to 198.19.255.21.

002793: *Jun 13 14:19:20.646: DHCPD: BOOTREQUEST from 0150.57a8.876b.14 forwarded to 198.19.255.22.

002794: *Jun 13 14:19:20.726: DHCPD: client's VPN is .

002795: *Jun 13 14:19:20.726: DHCPD: No option 125

002796: *Jun 13 14:19:20.726: DHCPD: forwarding BOOTREPLY to client 5057.a887.6b14.

002797: *Jun 13 14:19:20.726: DHCPD: Forwarding reply on numbered intf

002798: *Jun 13 14:19:20.726: DHCPD: no option 125

002799: *Jun 13 14:19:20.726: DHCPD: broadcasting BOOTREPLY to client 5057.a887.6b14.

Here is the router conf for both VLANs:

interface Vlan100

description ### VLAN Wired Voice ###

ip address 10.65.33.49 255.255.255.240

ip helper-address 198.19.255.21

ip helper-address 198.19.255.22

ip dns view-group splitdns

ip nat inside

ip virtual-reassembly in

ip tcp adjust-mss 1000

no autostate

crypto ipsec client ezvpn Vers-dCloud inside

!

interface Vlan101

description ### VLAN Wireless Voice ###

no ip address

bridge-group 101

!

interface BVI101

description ### BVI Wireless Voice ###

ip address 10.67.33.49 255.255.255.240

ip helper-address 198.19.255.21

ip helper-address 198.19.255.22

ip dns view-group splitdns

ip nat inside

ip virtual-reassembly in

ip tcp adjust-mss 1000

crypto ipsec client ezvpn Vers-dCloud inside

I don't know why I can't have IP from wireless voice VLAN whereas it is OK and wired voice VLAN and conf is the same!

Can you help me ?

Regards,

Clement

4 Replies 4

Richard Burts
Hall of Fame
Hall of Fame

Clement

The parts of the config that you have posted seem reasonable and I do not see a particular problem with them. The debug output is pretty clear that it is sending a request to the DHCP servers. It sort of implies that the servers are not sending a response. So my question to you is whether you can confirm that the DHCP servers have configured a scope for the subnet of 10.67.33.48?

HTH

Rick

HTH

Rick

Hello Richard,

I agree with you, it seems to have no response from the DHCP servers for the 10.67.33.49/255.255.255.240 subnet.

As DHCP servers are not mine, I will contact support to check if scope is configured.

Regards,

Clement

Hello

Just curious - Do you have IRB enabled

Bridge 101 protocol ieee

Bridger 101 route ip

res

Paul

Please don't forget to rate any posts that have been helpful.

Thanks.


Please rate and mark as an accepted solution if you have found any of the information provided useful.
This then could assist others on these forums to find a valuable answer and broadens the community’s global network.

Kind Regards
Paul

Hello Paul,

Yes you're true:

Router conf:

bridge 1 protocol ieee
bridge 1 route ip
bridge 101 protocol ieee
bridge 101 route ip
!
bridge irb

Integrated AP conf:

bridge 1 protocol ieee
bridge 1 route ip
bridge 101 protocol ieee

!
bridge irb

Clement

Review Cisco Networking for a $25 gift card