03-19-2019 12:34 PM - edited 05-09-2019 08:05 AM
Solucionado, cambie de socalo y reinicie el cmts y listo..
****
Despues de ip routing, que otra sentencia tengo que habilitar para alcanzar dispositivos de mi subred a la que pertenece mi puerto GigabitEthernet1/0/0, desde el puerto FastEthernet0/0/0 alcanzo a llegar a la xxx.xxx.70.4/24 y mi CMTS es la xxx.xxx.70.5; establesco esta ultima ip GigabitEthernet1/0/0 y pierdo ping a la 70.4 (down fast y up GigabitEthernet1/0/0 para evitar conflicto).
router#show ip inter bri
Interface IP-Address OK? Method Status Protocol
FastEthernet0/0/0 192.168.70.6 YES NVRAM administratively down down
GigabitEthernet1/0/0 192.168.70.5 YES NVRAM up up
******
interface FastEthernet0/0/0
ip address 192.168.70.5 255.255.255.0
shutdown
media-type rj45
speed auto
duplex auto
!
interface GigabitEthernet1/0/0
ip address 192.168.70.5 255.255.255.0
negotiation auto
Saludos
03-19-2019 02:38 PM
As i understand you want to move the IP address from one port to other port, if this is correct. (if not explain more, so addressed correctly)
you need to clear the ARP entries both the devices, since IP address change to new MAC address. to quick fix
03-19-2019 04:47 PM
No necesito mover los puertos, simplemente con la GigabitEthernet1/0/0 pierdo ping. Esto sucede cuando apago el FastEthernet0/0/0.
Nota: Tengo conectado el dowstream y upstream a un divisor y a un modem pero no da Ip (no me da DHCP).
Saludos
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide