06-04-2018 02:27 PM - edited 03-08-2019 03:14 PM
Hi CSC,
Not in a position to test this at the moment but been wondering if it is as simple as i believe... or not.
If i have multiple OSPF enabled devices on the same ethernet broadcast segment, can i use the neighbour statement to be selective about who become adjacent? I know with EIGRP i can do this. Is it possible within OSPF if i change the network type of the interfaces?
Solved! Go to Solution.
06-04-2018 02:54 PM - edited 06-04-2018 03:19 PM
Hello
Yes you can - By making the ospf peering non-broadcast network type which will negate multicast capability, thus you'll require the neighbour statement to establish the non DR/BDR peering
int x/x
ip ospf x area x
ip ospf network point-to-multipoint non-broadcast
router ospf X
neighbour x.x.x.x
res
Paul
06-04-2018 02:54 PM - edited 06-04-2018 03:19 PM
Hello
Yes you can - By making the ospf peering non-broadcast network type which will negate multicast capability, thus you'll require the neighbour statement to establish the non DR/BDR peering
int x/x
ip ospf x area x
ip ospf network point-to-multipoint non-broadcast
router ospf X
neighbour x.x.x.x
res
Paul
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide