10-02-2019 03:07 AM
Hello
i rebooted a switch. when that comes up again. i only got the port started with packet drop, takes the packets and throws them away. the port is trunk port. i saw the log file there i got the errors with host ..... vlan flapping between the ports.
so I had to configure other ports
we have RSTP
I wanted to ask how can I use the port again.
the port is configured as trunk
10-02-2019 05:18 AM
Can you post the configuration of the device and logs for reference to advise properly
also please post the device model and show version, how this is connected to other device some network toplogy to understnad
post below output from both devices
show inter trunk
show spanning-tree summary
10-02-2019 06:44 AM
the problem is that the AP is no longer connected to the switch, so everything is fine under the show commands.
I wanted to know if the problem would reoccur, how I could solve it.
Should I delete the MAC address from the corresponding port?
and reset port
10-02-2019 08:46 AM
until we see some information what we requete, not have any clue what was the issue you had ?
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide