cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements

202
Views
5
Helpful
5
Replies
Highlighted
Beginner

Packet: [ERROR] TenGigE0/0/2/1.1555: This interface is not ready to establish PPPoE sessions on

Hello,

I'm looking to understand what is real meaning of this error. What am I missing?

IOS: 6.0.2

Router: ASR-9001-S

When I start pppoe request I got:

RP/0/RSP0/CPU0:ios#LC/0/0/CPU0:

Oct  3 10:39:07.447 : pppoe_ma[389]: TenGigE0/0/2/1.1555: I dst ffff.ffff.ffff src 6a12.0b26.8e99: len 42 0x110900000004010100000000000000000000000000000000000000000000000000000000000000000000

LC/0/0/CPU0:Oct  3 10:39:07.447 : pppoe_ma[389]: Packet: [ERROR] TenGigE0/0/2/1.1555: This interface is not ready to establish PPPoE sessions on

LC/0/0/CPU0:Oct  3 10:39:07.447 : pppoe_ma[389]: [PADI-Recv]: TenGigE0/0/2/1.1555 peer-mac 6a12.0b26.8e99

LC/0/0/CPU0:Oct  3 10:39:07.447 : pppoe_ma[389]: [PADI-Recv]:    vlan-id-outer 1555

LC/0/0/CPU0:Oct  3 10:39:07.447 : pppoe_ma[389]: [PADI-Recv]:   DROPPED - PPPoE not ready on this interface

LC/0/0/CPU0:Oct  3 10:39:12.451 : pppoe_ma[389]: TenGigE0/0/2/1.1555: I dst ffff.ffff.ffff src 6a12.0b26.8e99: len 42 0x110900000004010100000000000000000000000000000000000000000000000000000000000000000000

Everyone's tags (2)
5 REPLIES 5
VIP Mentor

What is the configuration of

What is the configuration of the interface ? Do you have 'pppoe enable group' configured ? With subinterfaces, dot1q or ISL encapsulation is usually required, do you have that configured ?

Beginner

Hello my friend,

Hello my friend,

I've this:

interface TenGigE0/0/2/1.1555

service-policy type control subscriber politicaPPP

pppoe enable bba-group mygroup

encapsulation dot1q 1555

!

VIP Mentor

Hello,

Hello,

both the license and the configuration of your interface look good, actually. The license would appear as 'active' if it would be used or checked out by an application.

http://www.cisco.com/c/en/us/td/docs/routers/asr9000/software/asr9k_r4-1/system_management/command/reference/b_sysman_cr41asr9k/b_sysman_cr41asr9k_chapter_01110.html#wp2464985844

What does the configuration of your bba-group 'mygroup' look like ?

Beginner

Hello,

Hello,

I just had:

pppoe bba-group mygroup

!

Then, I tried to put:

pppoe bba-groupmygroup

sessions mac limit 10

!

And it worked!

Cheers :!

Beginner

Something I'm not sure if it

Something I'm not sure if it is a problem:

RP/0/RSP0/CPU0:ios#show license

Mon Oct  3 11:15:49.148 UTC

FeatureID: A9K-BNG-LIC-8K (Slot based, Permanent) 

  Total licenses 2

  Available for use         2

  Allocated to location     0

  Active                    0

  Store name             Permanent

  Store index               1

    Pool: Owner

      Total licenses in pool: 2

      Status: Available     2    Operational:    0

I have this feeling it should appear as active? But I'm not sure how it works exactly.

CreatePlease to create content
Content for Community-Ad
July's Community Spotlight Awards