cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
656
Views
5
Helpful
5
Replies

Packet: [ERROR] TenGigE0/0/2/1.1555: This interface is not ready to establish PPPoE sessions on

wilsonribeiro
Level 1
Level 1

Hello,

I'm looking to understand what is real meaning of this error. What am I missing?

IOS: 6.0.2

Router: ASR-9001-S

When I start pppoe request I got:

RP/0/RSP0/CPU0:ios#LC/0/0/CPU0:

Oct  3 10:39:07.447 : pppoe_ma[389]: TenGigE0/0/2/1.1555: I dst ffff.ffff.ffff src 6a12.0b26.8e99: len 42 0x110900000004010100000000000000000000000000000000000000000000000000000000000000000000

LC/0/0/CPU0:Oct  3 10:39:07.447 : pppoe_ma[389]: Packet: [ERROR] TenGigE0/0/2/1.1555: This interface is not ready to establish PPPoE sessions on

LC/0/0/CPU0:Oct  3 10:39:07.447 : pppoe_ma[389]: [PADI-Recv]: TenGigE0/0/2/1.1555 peer-mac 6a12.0b26.8e99

LC/0/0/CPU0:Oct  3 10:39:07.447 : pppoe_ma[389]: [PADI-Recv]:    vlan-id-outer 1555

LC/0/0/CPU0:Oct  3 10:39:07.447 : pppoe_ma[389]: [PADI-Recv]:   DROPPED - PPPoE not ready on this interface

LC/0/0/CPU0:Oct  3 10:39:12.451 : pppoe_ma[389]: TenGigE0/0/2/1.1555: I dst ffff.ffff.ffff src 6a12.0b26.8e99: len 42 0x110900000004010100000000000000000000000000000000000000000000000000000000000000000000

5 Replies 5

What is the configuration of the interface ? Do you have 'pppoe enable group' configured ? With subinterfaces, dot1q or ISL encapsulation is usually required, do you have that configured ?