cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
7235
Views
23
Helpful
8
Replies

packet tracer 5.1.1.2

hello everyone I am having trouble with the smart home activity in 5.1.1.2 my gateway is not showing any of the iot devices however I had to replace it because the default password and username weren't working so whether that has something to do with it I don't know thanks in advance

1 Accepted Solution

Accepted Solutions

jochong
Level 1
Level 1

Hello!

 

I had the same problem and saw a helpful video on YouTube by Cyber Geek. Here's the link:
5.1.1.2 Packet Tracer Adding IoT devices to Smart Homes | usernname/password admin | Problem Fixed! 

 

Summary:

He had an error logging in the home gateway (which I also had and I tried replacing the home gateway device with a new one. It fixed the login problem but no iot devices were being shown).

What he did was go to tablet > Programming tab > Run both com.cisco.mqttbroker and com.cisco.mqttclient

 

I have version 8 and it worked but I had to save first then reload the file.

Not sure why it's like that, though. If anyone has any idea, please let us know.

View solution in original post

8 Replies 8

Hello,

 

when I open your file in the latest version of Packet Tracer (8), it get a warning saying that some IoT devices are outdated, and the system asks me if I want to update these devices. Which version are you using, and which IoT devices can you not see ?

 

If you are not using version 8, try and update, and check if everything is visible then...

hi Georg am using version 8.0 and I clicked update when that notification pops up i also tried clicking no however it didn't work 

Never mind for some reason it worked once I reloaded the saved file not sure why but anyway thanks for taking your time to help me

Hello,

 

good to hear that it is working !

Hi,

 

I had the same problem; using PT 8 could not login with admin/admin to Home Gateway.

Tried with PT 7.3 it worked.

It seems the activity problem had to do with some bug in PT 8?

It says this pkt file is not compatible this version. 

It seems, that simple linking lab to the certain PacketTracer version could save a lot of us a lot of problems. The first quiz is also inappropriate in terms of PacketTracer 8 UX. I had to downgrade to 7.3 to make this lab run properly... I expected way more quality from the Cisco...

jochong
Level 1
Level 1

Hello!

 

I had the same problem and saw a helpful video on YouTube by Cyber Geek. Here's the link:
5.1.1.2 Packet Tracer Adding IoT devices to Smart Homes | usernname/password admin | Problem Fixed! 

 

Summary:

He had an error logging in the home gateway (which I also had and I tried replacing the home gateway device with a new one. It fixed the login problem but no iot devices were being shown).

What he did was go to tablet > Programming tab > Run both com.cisco.mqttbroker and com.cisco.mqttclient

 

I have version 8 and it worked but I had to save first then reload the file.

Not sure why it's like that, though. If anyone has any idea, please let us know.

Review Cisco Networking for a $25 gift card