03-24-2024 11:43 AM
HI IN ip ACL i see eq i define ACL
IP access list speed
10 permit tcp any any eq 8080
and Match to route-map
route-map speed, permit, sequence 10
Match clauses:
ip address (access-lists): speed
Set clauses:
ip next-hop 172.18.20.1
by when assign to physical interface L3 interface donnot work
03-24-2024 12:08 PM
Debug ip policy
Try run debug see why PBR not work
MHM
03-25-2024 12:24 AM
For load of my switch I cannot used Debug
03-24-2024 02:25 PM
the following reasons are possible:
Incorrect interface: Make sure you apply the route map to the correct interface. If you are using multiple interfaces, it is easy to make a mistake.
Routing problem: Verify that a route to address 172.18.20.1 exists and is correctly configured in the routing table. If the route is missing or incorrect, packets will not be forwarded correctly.
ACL errors: Make sure that your ACL matches exactly the traffic you want to redirect. In your case, the ACL is limited to traffic on port 8080. If your traffic is going through other ports, it will not match this ACL and thus the route map.
Check your NAT configuration: If you are using NAT (Network Address Translation), make sure it is properly configured and does not conflict with your route maps.
03-25-2024 12:24 AM
172.18.20.1 Is rechable and have ping donnot enbale feature NAT
03-24-2024 02:30 PM
Hello admin@atrinnet.net ,
can you clarify what is not working? PBR is not working? Or is the L3 interface not working?
Can you share the confihuration of the interface?
Please describe how are you testing.
03-25-2024 12:22 AM
description Server-CPANEL
no switchport
ip address IPV4/29
ipv6 address IPv6/64
ip policy route-map speed
no shutdown
Now my question is switch 9396px by nxos 9.3.12 support route-map by destanation port ? for example 8080???
03-25-2024 12:31 AM - edited 03-25-2024 12:32 AM
the set ip next-hop can be the issue
try use egress interface instead of next-hop
MHM
03-25-2024 11:27 PM
Yes this is PBR for output traffic of interface but not working
03-25-2024 11:29 PM
Instead of
ip next-hop 172.18.20.1
Use
Set interface <egress interface>
MHM
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide