02-20-2013 07:31 AM - edited 03-07-2019 11:49 AM
Hello All,
My question relates to IP PIM RP filtering and the resulting log entry:
PIM-6-INVALID_RP_JOIN ....
An example of a log buffer from one of my switches. You can see these reocurring logs slowly fill up my log buffer and syslog server:
Feb 20 10:01:26.009 EST: %PIM-6-INVALID_RP_JOIN: Received (*, 224.0.1.127) Join from 0.0.0.0 for invalid RP 10.10.10.10
Feb 20 10:02:04.026 EST: %PIM-1-INVALID_RP_REG: Received Register from 10.10.100.100 for 239.255.255.250, not willing to be RP
Feb 20 10:02:26.274 EST: %PIM-6-INVALID_RP_JOIN: Received (*, 239.255.255.250) Join from 0.0.0.0 for invalid RP 10.10.10.10
Feb 20 10:03:26.799 EST: %PIM-6-INVALID_RP_JOIN: Received (*, 232.44.44.233) Join from 0.0.0.0 for invalid RP 10.10.10.10
Feb 20 10:04:18.256 EST: %PIM-1-INVALID_RP_REG: Received Register from 10.10.100.100 for 239.255.255.253, not willing to be RP
Feb 20 10:04:34.856 EST: %PIM-6-INVALID_RP_JOIN: Received (*, 224.0.1.22) Join from 0.0.0.0 for invalid RP 10.10.10.10
Feb 20 10:05:37.105 EST: %PIM-6-INVALID_RP_JOIN: Received (*, 239.192.83.80) Join from 0.0.0.0 for invalid RP 10.10.10.10
Feb 20 10:06:18.338 EST: %PIM-1-INVALID_RP_REG: Received Register from 10.10.100.100 for 239.255.255.253, not willing to be RP
Feb 20 10:06:41.154 EST: %PIM-6-INVALID_RP_JOIN: Received (*, 224.0.1.40) Join from 0.0.0.0 for invalid RP 10.10.10.10
Feb 20 10:07:55.811 EST: %PIM-6-INVALID_RP_JOIN: Received (*, 239.255.255.253) Join from 0.0.0.0 for invalid RP 10.10.10.10
Feb 20 10:08:55.860 EST: %PIM-6-INVALID_RP_JOIN: Received (*, 225.1.1.2) Join from 0.0.0.0 for invalid RP 10.10.10.10
My current configuration on the IP RP switch:
sh-sb-c02#sh run | i pim
ip pim sparse-mode
ip pim sparse-mode
ip pim rp-address 10.10.10.10 GOOD-MULTICAST-ACL
I understand the PIM RP filtering is creating these logs. I have verified the ACL used for filtering is accurate and I am getting the results I want. I have a very large network so going to each and every host that generates this multicast traffic and turn it off at the source is not an option. My question is whether there is a way to disable this logging?
Thanks
Solved! Go to Solution.
02-20-2013 10:01 AM
Greetings.
You may want to look at the "logging discriminator" feature which allows you more granular control over certain syslog messages.
http://www.cisco.com/en/US/docs/ios/12_4t/12_4t11/htnmsylg.html#wp1056364
Hope this helps,
Matt
02-20-2013 10:01 AM
Greetings.
You may want to look at the "logging discriminator" feature which allows you more granular control over certain syslog messages.
http://www.cisco.com/en/US/docs/ios/12_4t/12_4t11/htnmsylg.html#wp1056364
Hope this helps,
Matt
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide