cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
782
Views
0
Helpful
3
Replies

Ping No Reply on certain IP

yllee1314
Level 1
Level 1

 

Hi all,

 

Currently I'm having on some ping no reply on only certain IP when ping to a NLB virtual IP.

Usually these IP which did not get reply from the NLB virtual IP are those host where their IP are assigned by DHCP.

A few SPAN port had been configured and wireshark have been done.

The NLB server did reply the ping.

Capture shows the ping reply did enter the Core Switch, however the ping reply did not exit the Core Switch to the WAN interface where the host is sitting.

Is there any other method to check on the Core Switch?

Some other  IP does not face this issue and packets were able to exit the Core Switch back to the host.

 

3 Replies 3

Rajeev Sharma
Cisco Employee
Cisco Employee

Hey,

Would need switch details, like model number, installed supervisor (in case of modular switch), running IOS and configuration.

Regards,

RS

Hey Rajeevsh,

 

It seems that the issue was due to an ACL blocking some of the traffics.

The address of NLB must be inserted into the switch with this command :

mac address-table mac 000.XXX.XXX.XXX interface Giga1/0/1 Giga1/0/2

if your terminal servers are on the port Giga1/0/1 and Giga1/0/2 and the NLB mac address is a Multicast address

Review Cisco Networking for a $25 gift card