On my Catalyst 2960 switch, the ports 33 to 40 show power is being supplied, but nothing is connected to those ports?
If I do show power inline, they show power supplied. But there is nothing plugged in?!?
show power inline
Module Available Used Remaining
(Watts) (Watts) (Watts)
------ --------- -------- ---------
1 370.0 237.2 132.8
2 370.0 215.7 154.3
3 370.0 224.8 145.2
Interface Admin Oper Power Device Class Max
(Watts)
--------- ------ ---------- ------- ------------------- ----- ----
Gi1/0/33 auto on 15.4 Ieee PD 3 30.0
Gi1/0/34 auto on 7.0 Ieee PD 2 30.0
Gi1/0/35 auto on 7.0 Ieee PD 2 30.0
Gi1/0/36 auto on 7.0 Ieee PD 2 30.0
Gi1/0/37 auto on 6.5 Ieee PD 0 30.0
Gi1/0/38 auto on 6.5 Ieee PD 0 30.0
Gi1/0/39 auto on 6.5 Ieee PD 0 30.0
Gi1/0/40 auto on 6.5 Ieee PD 0 30.0
