Hi,
So this is probably a dumb question but I am just curious.
If i want to set the bandwidth for a port to be 30Mb. Would I use the following math to do so
(30*1024)*1024 ?
So in other words my policy map would look like
policy-map 30MB
class class-default
police 31457000 8000 exceed-action drop
on a 3750 switch running
flash:/c3750-ipservicesk9-mz.122-50.SE5/c3750-ipservicesk9-mz.122-50.SE5.bin"
Thank you.