Policy based routing with nexus OS (Nex 6000)

[dmooreami]

Need to  route some Steelhead Mobile clients to a RiverBed VM Steelhead to get wan acceleration to clients over Anyconnect VPN (yes it can be done and does work).  Need to do some policy based routing to get specific subnets routed to a specific host.  Example if coming from subnet 10.10.10.1/24 then next hop 10.20.20.200 (Steelhead VM).

Have a Nexus 6000 running 7.1(3)N1(2).  Can someone point out where I can find some NxOS PBR examples and capabilities of this switch and OS version.

I keep finding Nexus 9000 with searches, despite putting in Nexus 6000.

Thanks

(If wrong group, Mod please feel free to move)

[Sergiu.Daniluk]

Hi @dmooreami 

Here is the config guide for PBR on N6K:

https://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus6000/sw/unicast/7_x/cisco_n6k_layer3_ucast_cfg_rel_x/l3_pbr.html 

Regards,

Sergiu

[dmooreami]

Arrrrgghhhh! It said UNICAST routing in the search descriptions, so I just ASSumed it was for what the description SAID it was! How stupid of me not to read Cisco mind that a title of UNICAST routing would include Layer3 routing and PBR