10-10-2006 05:42 AM - edited 03-05-2019 12:09 PM
can anyone please point me in the direction of an article/document on how to plan, configure and implement use of etherchannel with 3750s.
have trawled cisco site with not much success.
thanks in advance
10-10-2006 05:46 AM
10-10-2006 05:47 AM
10-10-2006 05:49 AM
Hi,
Here is the link for configuring etherchannel on Cat3750.
http://www.cisco.com/univercd/cc/td/doc/product/lan/cat3750/12225see/scg/swethchl.htm
HTH,
-amit singh
10-10-2006 05:50 AM
Hi,
Here is the link for configuring etherchannel on Cat3750.
http://www.cisco.com/univercd/cc/td/doc/product/lan/cat3750/12225see/scg/swethchl.htm
HTH,
-amit singh
10-10-2006 08:32 PM
Follow these steps for configuring Etherchannel on 3750
Create a Port Channel and the turn it on on interfaces
interface Port-channel1
switchport trunk encapsulation dot1q
switchport mode trunk
no ip address
interface GigabitEthernet1/0/25
switchport trunk encapsulation dot1q
switchport mode trunk
no ip address
no mdix auto
channel-group 1 mode on
!
interface GigabitEthernet1/0/26
switchport trunk encapsulation dot1q
switchport mode trunk
no ip address
no mdix auto
channel-group 1 mode on
Thanks
Deepak
01-21-2024 11:04 PM
Hey there! I had a similar challenge when setting up EtherChannel with 3750s. Configuring EtherChannel on Cisco 3750 switches involves selecting and bundling ports, ensuring compatibility, and setting up consistent configurations on both ends. Use show etherchannel summary to check the status.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide