Port Mirroring on Nexus for Same Source ınterface

[mahmutaydin90]

Hello,

In monitor config  for mirroring, if we use same source port channel  in different session for different destination, is it supported or not? If we do, does any outage occur about existing mirroring?

monitor session 4

source interface port-channel10 both 

destination interface ethernet 1/16

no shut

monitor session 5

source interface port-channel10 both 

destination interface ethernet 1/37

no shut

Regards,

[balaji.bandi · Accepted solution]

that is supported as long as the destination  (not FEX port).

some guide lines for more information :

https://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus9000/sw/6-x/system_management/configuration/guide/b_Cisco_Nexus_9000_Series_NX-OS_System_Management_Configuration_Guide/sm_14span.html

[mahmutaydin90]

thank you so much. I tested and worked in production