Port security reporting

[johnny_5]

Are there any CLI reporting one can generate off a 3850 switch to show all the switch ports that have port-security enabled besides doing the sh run command. Also any command that could pipe a report a txt showing all the switch ports that are admin down, up etc.

Trying to fulfill an audit item that requires proof of such config settings.

Thanks in advance.

[SamanBayat4424]

I've recently checked exactly on 3850 Switch, what you said. The only command that could verify statues of port-security is "Show port-security".

Hope to help

Regards,

Saman Bayat

***Rate All Helpful Responses***

[paul driver · Accepted solution]

Hello

I dont have access to any 3850 to test but on other switches you can pipe your run commands to a txt file on the flash using the EEM script and cron timers and theTEE/Append commands and then export them to a tftp server or you can just open a terminal emulation session like putty and log a putty session to a txt file on your pc with the latter you could also pipe out unwarranted config.

Example will run every monday-friday at 9:00am

event manager applet Portsec
event timer cron cron-entry "0 9 * * 1-5"
action 1.1 cli command "enable"
action 1.2 cli command "term len 0"
action 1.3 cli command "show ip int brief | tee flash:portsec.txt"
action 1.4 cli command "sh port-security | append flash:portsec.txt

more flash:portsec.txt