cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
3157
Views
0
Helpful
15
Replies

Power in line problem on my WS-C3560X-48P

rkamonou
Level 1
Level 1

Hi, everyone. Can anyone help with this problem regarding PoE issue on my Cisco C3560X switch?

This morning I was trying to configure a new IP phone and I realised that any time I plugged the phone into a switch port which was already working with another phone, the port PoE Operation mode goes off systematically. I tried on 4 ports with already working IP phones and the same problem occurred on those ports. I stop unplugging other working ports and I tried resetting power inline options on the switch but nothing worked. Any idea or solution to this problem?

Below is the output of the power inline status:   

 

asw-sroom(config-if)#do sh power inli
Available:467.0(w) Used:172.9(w) Remaining:294.1(w)

 

 

Interface Admin   Oper Power    Device   Class Max (Watts)
--------- ------ ---------- ------- ------------------- ----- ----
Gi0/1 auto on 6.4 IP Phone 8945 2 30.0
Gi0/2 auto off 0.0 n/a n/a 30.0
Gi0/3 auto off 0.0 n/a n/a 30.0
Gi0/4 auto off 0.0 n/a n/a 30.0
Gi0/5 auto off 0.0 n/a n/a 30.0
Gi0/6 auto on 6.4 Ieee PD 2 30.0
Gi0/7 auto on 15.4 AIR-CAP3502I-A-K9 3 30.0
Gi0/8 auto on 6.4 IP Phone 8845 2 30.0
Gi0/9 auto off 0.0 n/a n/a 30.0
Gi0/10 auto on 6.4 Ieee PD 2 30.0
Gi0/11 auto on 6.4 Ieee PD 2 30.0
Gi0/12 auto off 0.0 n/a n/a 30.0
Gi0/13 auto on 6.4 Ieee PD 2 30.0
Gi0/14 auto off 0.0 n/a n/a 30.0
Gi0/15 auto on 19.1 IP Phone 9971 3 30.0
Gi0/16 auto on 6.4 IP Phone 8945 2 30.0
Gi0/17 auto on 6.4 IP Phone 8945 2 30.0
Gi0/18 auto on 6.4 IP Phone 8945 2 30.0
Gi0/19 auto on 6.4 Ieee PD 2 30.0
Gi0/20 auto off 0.0 n/a n/a 30.0
Gi0/21 auto on 15.4 CIVS-IPC-6400 0 30.0
Gi0/22 auto off 0.0 n/a n/a 30.0
Gi0/23 auto off 0.0 n/a n/a 30.0
Gi0/24 auto off 0.0 n/a n/a 30.0
Gi0/25 auto off 0.0 n/a n/a 30.0
Gi0/26 auto off 0.0 n/a n/a 30.0
Gi0/27 auto off 0.0 n/a n/a 30.0
Gi0/28 auto off 0.0 n/a n/a 30.0
Gi0/29 auto off 0.0 n/a n/a 30.0
Gi0/30 auto off 0.0 n/a n/a 30.0
Gi0/31 auto off 0.0 n/a n/a 30.0
Gi0/32 auto on 6.4 IP Phone 8945 2 30.0
Gi0/33 auto off 0.0 n/a n/a 30.0
Gi0/34 auto on 6.4 IP Phone 8945 2 30.0
Gi0/35 auto off 0.0 n/a n/a 30.0
Gi0/36 auto on 15.4 CIVS-IPC-6400 0 30.0
Gi0/37 auto on 15.4 CIVS-IPC-6400 0 30.0
Gi0/38 auto off 0.0 n/a n/a 30.0
Gi0/39 auto off 0.0 n/a n/a 30.0
Gi0/40 auto on 15.4 CIVS-IPC-2835 4 30.0
Gi0/41 auto off 0.0 n/a n/a 30.0
Gi0/42 auto off 0.0 n/a n/a 30.0
Gi0/43 auto off 0.0 n/a n/a 30.0
Gi0/44 auto off 0.0 n/a n/a 30.0
Gi0/45 auto off 0.0 n/a n/a 30.0
Gi0/46 auto off 0.0 n/a n/a 30.0
Gi0/47 auto off 0.0 n/a n/a 30.0
Gi0/48 auto off 0.0 n/a n/a 30.0

 

Thanks

 

15 Replies 15

Hoo no this port is not for TS, It is rather for a network Printer. below is a port with voice VLAN config.

 

interface GigabitEthernet0/24
switchport access vlan 208

switchport voice vlan 100
switchport mode access
spanning-tree portfast

Review Cisco Networking for a $25 gift card