07-17-2009 01:04 PM - edited 03-06-2019 06:49 AM
Hello folks. I need a little help. I'm trying to set up different privilege level access on my switches. I found out that 1 switch is running CATOS I don't know the command or if it is even possible to set it up. Please help.
--------------------
username admin privilege 0 password 0 test
privilege exec level 0 terminal lenght 0
privilege exec level 0 show interfaces
________________
Thanks,
JP
07-17-2009 09:49 PM
This could be accomplished on IOS, but there is no equivalent way to do this on CATOS.
You can use Command Authorization, which is possible only with tacacs+. You can use the cisco ACS server for that.
http://www.cisco.com/en/US/tech/tk59/technologies_tech_note09186a0080094ea4.shtml#f
The Catalyst has non-privileged (equivalent to '1') & privileged (equivalent to '15').
07-18-2009 05:19 AM
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide